Hi,
We have OS4K V10 with IP subscribers and SIP trunk for calls to public networks.
The customer wants internal calls to be diverted to one number and external calls to another.
Everything is clear here (ADD-ZIEL: FWD, ........), but the problem is that all calls, both internal and external, are recognized as internal calls.
I think this is because calls from the outside are routed to internal subscribers using the LCR. I don’t see a way to do otherwise, as most subscribers have multiple public numbers.
What can be done to make an external call recognized as an external call?
LCR and ZIEL look like this:
H500: AMO LDAT STARTED
+------------------------------------------------------------------------------+
| LROUTE = 101 LDPLN NAME = ST VIDINIS SERVICE = ALL |
| TYPE = LCR DNNO OF ROUTE = 10 |
| SERVICE INFO = |
+------+-----+-----+----+-----+----------+-----------+----------+------+-------+
| | | | | | SCHEDULE | CARRIER | | | |
|LRTEL | LVAL|TGRP | ODR|LAUTH| ABCDEFGH | ZONE| LATTR | LDSRT|COTIDX |
+------+-----+-----+----+-----+----------+-----------+----------+------+-------+
| 1| 1| 10| 101| 7 | ******** | 1 LONG01| RERTEINT | | 0 |
| | | | | WCHREG | | |
+------------------------------------------------------------------------------+
H500: AMO LODR STARTED
+-------------------------------------------------------+
| ODR POSITION CMD PARAMETER |
+--------+----------------------------------------------+
| 101 | 1 ECHO 3 |
| | 2 END |
+--------+----------------------------------------------+
H500: AMO LDPLN STARTED
+--------------+-------------------------------------------------+
| | |
| DIPLNUM: 0| |
| LDPNO :66 | LDP : 111-222-91XXX |
| | SPC : 22 |
| | FDSFIELD : 0 SDSFIELD : 0 PINDP : N |
+------+-------+-------------------------------------------------+
| DPLN | LROUTE| LAUTH |
|------+-------+-------------------------------------------------+
| 3 | 101 | 1 |
+------+-------+-------------------------------------------------+
H500: AMO ZIEL STARTED
FWD
SOURCE | SERVICE | DTYPE | ITYPE | CFVAR | DESTINATION
-------------+----------+-------+---------+---------+-----------------------
91111 | VCE | CFNR | INT | SYSTEM | xxxxxxxxx
NAME :
| VCE | CFNR | EXT | SYSTEM |yyyyyyyyy
NAME :
H500: AMO ACTDA STARTED
+------------------------------------------------------------------------------+
| STATION NUMBER 91111 |
+------------------------------------------------------------------------------+
| DIVERSION: |
| DESTINATION NUMBER | CFVAR | DTYPE | ITYPE | SI |
| | | | | |
| xxxxxxxxx | SYSTEM | CFNR | INT | VCE |
| yyyyyyyyy | SYSTEM | CFNR | EXT | VCE |
+------------+-----------+----------+----------+----------+----------+---------+
| DO NOT | VOICE CALL| RING | REP. | REMIND | RINGER- | CALL |
| DISTURB | REJECT | XFER | SECR. | HH:MM | CUTOFF | WAITING |
+------------+-----------+----------+----------+----------+----------+---------+
| | X | | | | | |
We have OS4K V10 with IP subscribers and SIP trunk for calls to public networks.
The customer wants internal calls to be diverted to one number and external calls to another.
Everything is clear here (ADD-ZIEL: FWD, ........), but the problem is that all calls, both internal and external, are recognized as internal calls.
I think this is because calls from the outside are routed to internal subscribers using the LCR. I don’t see a way to do otherwise, as most subscribers have multiple public numbers.
What can be done to make an external call recognized as an external call?
LCR and ZIEL look like this:
H500: AMO LDAT STARTED
+------------------------------------------------------------------------------+
| LROUTE = 101 LDPLN NAME = ST VIDINIS SERVICE = ALL |
| TYPE = LCR DNNO OF ROUTE = 10 |
| SERVICE INFO = |
+------+-----+-----+----+-----+----------+-----------+----------+------+-------+
| | | | | | SCHEDULE | CARRIER | | | |
|LRTEL | LVAL|TGRP | ODR|LAUTH| ABCDEFGH | ZONE| LATTR | LDSRT|COTIDX |
+------+-----+-----+----+-----+----------+-----------+----------+------+-------+
| 1| 1| 10| 101| 7 | ******** | 1 LONG01| RERTEINT | | 0 |
| | | | | WCHREG | | |
+------------------------------------------------------------------------------+
H500: AMO LODR STARTED
+-------------------------------------------------------+
| ODR POSITION CMD PARAMETER |
+--------+----------------------------------------------+
| 101 | 1 ECHO 3 |
| | 2 END |
+--------+----------------------------------------------+
H500: AMO LDPLN STARTED
+--------------+-------------------------------------------------+
| | |
| DIPLNUM: 0| |
| LDPNO :66 | LDP : 111-222-91XXX |
| | SPC : 22 |
| | FDSFIELD : 0 SDSFIELD : 0 PINDP : N |
+------+-------+-------------------------------------------------+
| DPLN | LROUTE| LAUTH |
|------+-------+-------------------------------------------------+
| 3 | 101 | 1 |
+------+-------+-------------------------------------------------+
H500: AMO ZIEL STARTED
FWD
SOURCE | SERVICE | DTYPE | ITYPE | CFVAR | DESTINATION
-------------+----------+-------+---------+---------+-----------------------
91111 | VCE | CFNR | INT | SYSTEM | xxxxxxxxx
NAME :
| VCE | CFNR | EXT | SYSTEM |yyyyyyyyy
NAME :
H500: AMO ACTDA STARTED
+------------------------------------------------------------------------------+
| STATION NUMBER 91111 |
+------------------------------------------------------------------------------+
| DIVERSION: |
| DESTINATION NUMBER | CFVAR | DTYPE | ITYPE | SI |
| | | | | |
| xxxxxxxxx | SYSTEM | CFNR | INT | VCE |
| yyyyyyyyy | SYSTEM | CFNR | EXT | VCE |
+------------+-----------+----------+----------+----------+----------+---------+
| DO NOT | VOICE CALL| RING | REP. | REMIND | RINGER- | CALL |
| DISTURB | REJECT | XFER | SECR. | HH:MM | CUTOFF | WAITING |
+------------+-----------+----------+----------+----------+----------+---------+
| | X | | | | | |