Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OS4K BLF installation

Status
Not open for further replies.

LAAZ

Systems Engineer
Aug 4, 2021
111
IN
Hi Friends

Please guide me how to add BLF in 40 HFA and programming of BLF keys

I have assigned in SBCSU and which STD has to assign to that extension.

Thanks in advance
 
CHANGE-TAPRO:,40,OST40BLF,,,,,,,,,VACANT,PU,KNOVR,SPLT,CALLOG,CONF,,,,,,"OS40BLF";
CHANGE-TAPRO:,40,OPTIA1,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME;
CHANGE-TAPRO:,40,OPTIA2,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME;
CHANGE-TAPRO:,40,OPTIA3,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME;
CHANGE-TAPRO:,40,OPTIA4,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME;
CHANGE-TAPRO:,40,OPTIA5,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME,NAME;

You will need a power adaptor to run the BLF
Ensure you unplug the phone when you are physically adding on the BLF

Is this going to be the only 'Operator' ?

All of the above keys are added as NAME - of course you might need to add some/all in as DSS to get them to light up for internal extensions.


 
If this is to be the Operator and it needs to change the Night Service Destinations (NAVAR) then you can activate patches to assist with that.
LED signalling at switchover device for night server
and
Signal active night station via LED
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top