jester4281
IS-IT--Management
How can I make it so when my mac starts it maps two network drives I have that I can manually connect through the chooser.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
OS 9 Mapping Drive
- Thread starter jester4281
- Start date
- Status
When you select the drives in the choooser, place a checkmark in the box on the right hand side. This will have your mac attempt to mount them at startup. Be aware on some systems this can cause a 2 minute delay in booting if the network is unavailable. (Basically your machine will hang for two minutes while it looks for the drive.) So, if you're using a laptop it may not be wise to check that. Instead, make an alias of the drives, so all you have to do is double click on them.
Best of luck,
PT
Best of luck,
PT
- Thread starter
- #4
jester4281
IS-IT--Management
I get a Startup mounting is not currently supportd for this log on method.
I am running Mac OS 9.2
I am running Mac OS 9.2
- Status
Similar threads