Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ORIGIN ~ Diverts 1

Status
Not open for further replies.

alchohaz

Technical User
Mar 25, 2004
216
GB


I have the route shown below (ROUTE 60 - IP) that comes into our MD110 in London, i am trying to define it as Private Network so taht i can use the divert on origin feature, however the link is currently only diverting on the origin for PUBLIC.

How do I change ROUTE 60 to act as PRIVATE NETWORK instead of PUBLIC NETWORK?


Code:
<rocap:rou=60;
ROUTE CATEGORY DATA
ROU SEL              TRM SERV       NODG DIST DISL TRAF     SIG          BCAP
60  0130000000000010 5   2100030000  0   30   128  03151515 111100100090 001100

END
 
<rodap:rou=60;
ROUTE DATA
ROU   TYPE  VARC        VARI        VARO        FILTER  
60    TL65  H'00000000  H'00000011  H'00000000  NO

END

Thanks Al.





[red]Striker : My orders came through. My squadron ships out tomorrow, we're bombing the storage depots at Daiquiri at 18:00 hours. We're coming in from the North, below their radar.[/red]
[blue]Elaine : When will you be back?[/blue]
[red]Striker : I can't tell you that? It's classified.[/red]
 
Hi

Try changing digit 3 of SERV...
ROCAC:ROU=60,SERV=2110030000;

Regards
Isinor
 
Isinor, Already tried this and no Joy.

Thanks
Al


[red]Striker : My orders came through. My squadron ships out tomorrow, we're bombing the storage depots at Daiquiri at 18:00 hours. We're coming in from the North, below their radar.[/red]
[blue]Elaine : When will you be back?[/blue]
[red]Striker : I can't tell you that? It's classified.[/red]
 
alchohaz, serv D3 must be set

what is your RODDP?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
I have tried the following:


Code:
EXTERNAL DESTINATION ROUTE DATA
DEST  DRN ROU CHO CUST ADC                        TRC SRT NUMACK PRE
71110     60           0636100000000050006000000  5   6   0      71110 
71100     60           0626100000000050006000000  5   6   0      71100



[red]Striker : My orders came through. My squadron ships out tomorrow, we're bombing the storage depots at Daiquiri at 18:00 hours. We're coming in from the North, below their radar.[/red]
[blue]Elaine : When will you be back?[/blue]
[red]Striker : I can't tell you that? It's classified.[/red]
 
can you describe the callcase?



-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
As mentioned in earlier post i am experiencing difficulties with call coming in from IP (QSIG) and diverting to VMX (DPNSS), to overcome this i am looking at making calls from this origin, divert to a different location.

So "A" Party makes call from Rotterdam MD110 to DDI Range in London, LCR kicks in and routes the call over the IP Trunk (ROU 60). Call arrives in London (again ROU 60) and hits the phone which has an imediate divert in place.

When the CDIV is set to "CDIV=001151002;" call fails, when set to CDIV=001151020; call passes to common divert position.

Cheers
Al








[red]Striker : My orders came through. My squadron ships out tomorrow, we're bombing the storage depots at Daiquiri at 18:00 hours. We're coming in from the North, below their radar.[/red]
[blue]Elaine : When will you be back?[/blue]
[red]Striker : I can't tell you that? It's classified.[/red]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top