Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OrderPro error

Status
Not open for further replies.

p74833

IS-IT--Management
May 24, 2012
7
US
I am using OrderPro 9.5 to extract log file from Meridian 1.

Small portion of the file has corrupt characters.

any ideas on the issue? version issue?

 
If you open a presales ticket with ETAS they will clean this for you. Or you can scroll throught the log file and clear out any bad characters. I have found that if there are any audit messages, or error messages displayed while running the extract the upload will fail. I normally clean this up and it will work.

Also, I think they are at 9.6 now.
 
I didn't see 9.6 available on the website. The error occured in LD 32
 
Only OrderPro 9.5.0 is available. As stated above, just have SCH on your TTY to prevent other screen prompts appearing.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top