Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
OrderPro causes an Initialization 1
- Thread starter ntTech50
- Start date
-
1
- #2
These are known issues and patches
1. Scenario: Rls 23 & 24 Op11C which include BRI / MISP
Error: Extraction stops when running LD81 and the last command sent is FEAT CNUA or FEAT VSIT. The Status Bar shows 'Waiting for NACT'. (1)
Cause: This problem arises when a MISP is installed on an Option 11C
Fix: Remove the MISP & re-run the extraction or apply patch MPLR10456 as a fix for software releases 23.18, 23.35, 23.47, 24.09, 24.22, and 23.55. The PRS reference is BV77382.
2. Scenario: Rls 24. 24, 25.08 and 25.30 Op11C
Error: Extraction stops when running LD81 and the last command sent is FEAT CNUA or FEAT VSIT. The Status Bar shows 'Waiting for NACT'. (2)
Cause: This patch is relevant for Opt 11C only at rls 24.24, 25.08 and 25.30.
Fix: Apply patch MPLR15624
Hope this helps.
John
1. Scenario: Rls 23 & 24 Op11C which include BRI / MISP
Error: Extraction stops when running LD81 and the last command sent is FEAT CNUA or FEAT VSIT. The Status Bar shows 'Waiting for NACT'. (1)
Cause: This problem arises when a MISP is installed on an Option 11C
Fix: Remove the MISP & re-run the extraction or apply patch MPLR10456 as a fix for software releases 23.18, 23.35, 23.47, 24.09, 24.22, and 23.55. The PRS reference is BV77382.
2. Scenario: Rls 24. 24, 25.08 and 25.30 Op11C
Error: Extraction stops when running LD81 and the last command sent is FEAT CNUA or FEAT VSIT. The Status Bar shows 'Waiting for NACT'. (2)
Cause: This patch is relevant for Opt 11C only at rls 24.24, 25.08 and 25.30.
Fix: Apply patch MPLR15624
Hope this helps.
John
- Status
Similar threads
- Locked
- Question
- Locked
- Helpful tip
- Locked
- Question
