When setting up a new CAS Array, should a person install 2 instances of the CAS role prior to the creation of the WNLB configuration? Or is configuring the WNLB before the CAS installation preferred? Either way the powershell commands required are understood to be run, I am just trying to gauge if there is a preferred method. Thanks for your help!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Order of configuration for NLB
- Thread starter Cstorms
- Start date
There's no preferred method.
If you install the CAS array before creating the stores, the stores will automatically be set to use the array which saves a PS line.
Remember that the NLB can't go on an MBX server if you plan to have it in a DAG.
If you install the CAS array before creating the stores, the stores will automatically be set to use the array which saves a PS line.
Remember that the NLB can't go on an MBX server if you plan to have it in a DAG.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
