Scunningham99
Programmer
Hi
We are receiving the following in the disk utility
"Warning: Several paths to this drive has been detected but no corresponding multipath device was found. Your OS may be misconfigured."
Multipath is configured and working correctly. Is this actually a problem? because the dm-x are displayed ok, its just seems to be repeating devices in the gui.
ie
stage_area (360a98000572d544b4234707941485531) dm-16 NETAPP,LUN
size=200G features='2 pg_init_retries 50' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=1 status=active
| |- 1:0:2:0 sdah 66:16 active ready running
| |- 1:0:3:0 sdax 67:16 active ready running
| |- 2:0:2:0 sdct 70:16 active ready running
| `- 2:0:3:0 sddj 71:16 active ready running
`-+- policy='round-robin 0' prio=1 status=enabled
|- 1:0:0:0 sdb 8:16 active ready running
|- 1:0:1:0 sdr 65:16 active ready running
|- 2:0:0:0 sdbn 68:16 active ready running
`- 2:0:1:0 sdcd 69:16 active ready running
Thanks in advance!
Sy UK