Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Option11c TIE PRI to Asterisk

Status
Not open for further replies.

StinkTech

Programmer
Oct 16, 2006
77
US
Connecting an Asterisk box to an Opttion11c via a TIE PRI. The Option11c has 2 PRI's from AT&T and a TIE PRI to the Asterisk Box. The Asterisk Box has a PRI from Windstream. Have call routing between the two working but cannot figure out the timing setup of the TIE PRI to the Asterisk box to stop SLIPs on the Option11c.

* The Option11c is receiving SLIPR on the PRI to the asterisk box if I set the Asterisk Box TIE line clocking to free.
* The Option11c is receiving SLIPD on the PRI to the asterisk box if I set the Asterisk Box TIE line clocking to Windstream PRI.

How do you set the clocking on the TIE PRI to stop this SLIPs?

[Option11c] <--Client--AT&T PRI--NET-->
[Option11c] <--Client--AT&T PRI--NET-->
[Option11c] <--Client--TIE PRI to Asterisk--NET-->[Asterisk Box]<--Client--Windstream PRI--NET-->

Thanks,
StinkTech
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top