Mar 7, 2011 #1 dughard Technical User Apr 8, 2004 74 GB Is there a way to get an Option 11E to load the customer data from the cartridge on power up instead of loading from the score ?
Is there a way to get an Option 11E to load the customer data from the cartridge on power up instead of loading from the score ?
Mar 7, 2011 #2 Firebird Scrambler Systems Engineer Apr 7, 2003 7,199 GB In LD 43, use "UPS" instead of EDD. All the best Firebird Scrambler Meridian 1 / Succession and BCM / Norstar Programmer in the UK http://www.linkedin.com/in/davidbromley If it's working, then leave it alone!. Upvote 0 Downvote
In LD 43, use "UPS" instead of EDD. All the best Firebird Scrambler Meridian 1 / Succession and BCM / Norstar Programmer in the UK http://www.linkedin.com/in/davidbromley If it's working, then leave it alone!.
Mar 9, 2011 Thread starter #3 dughard Technical User Apr 8, 2004 74 GB Thanks Firebird,but having found some documentation,I think the UPS command instructs the system -not to load from the cartridge on SYSLOAD. It also says that the normal MO is to load the data on the cartridge to the RAM on the CPU. I just need to swap the soft cartidges over I think. Unless of course,I have misinterpreted the docs !!! Upvote 0 Downvote
Thanks Firebird,but having found some documentation,I think the UPS command instructs the system -not to load from the cartridge on SYSLOAD. It also says that the normal MO is to load the data on the cartridge to the RAM on the CPU. I just need to swap the soft cartidges over I think. Unless of course,I have misinterpreted the docs !!!