Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Option 11c TTY Commands

Status
Not open for further replies.

BigDogJeff

Technical User
Nov 2, 2006
31
US
I need to diable a TTY port in my option 11c. I have tryed in LD 37 DIS TTY x, DIS ttyx and I get an err code IOD009. I know commands are sometimes different in the 11's than the 81c that I usualy work on but not sure if there is a different LD and /or command for this or not.

Thanks Folks

Jeff
 
On an option 11 you have 3 TTY's, i forgot which one ( i think 0 off the octopus cable) is the one you should be on to disable the other tty's

IOD0009
Disabling of active input device is not allowed.
Action: Go to different TTY or use SL-1 maintenance set.
Severity: Info


JohnThePhoneGuy

"If I can't fix it, it's not broke!
 
Do a STAT in 37 and see what you have and POST HERE.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
(Banging Head on desk) I just descovered where my issue is. Whomever setup the TTY's flip flopped the labeling. The DIGI is actualy TTY 1 and the Dialup is TTY 0.

TTY 0 : ENBL DES: Digi
TTY 1 : ENBL DES: dialup
TTY 2 : ENBL DES: CDR
TTY 8 : DSBL

Sorry to have wasted your time. AAAARRGGHH (Continuing head banging)
 
Remember TTY 0 is the Master TTY and is the only one that can do certain things.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top