Option 11C Range Programming?

[Jumpermonkey]

Is there a way to "range" program stations or just add or delete a CLS item in the Option 11C?
In other words, can I program a consecutive range of either TNs or DNs with just a few commands?

Thanks to all in advance!

JumperMonkey

 

[dnc16]

I saw a tech do something similar to that with scripts he had written that ran in CrossTalk ( terminal program).
I wasn't able to get a copy of the script though.

 

[mikeyb123]

Try the scripting forum. Someone might be able to help.

"It's not getting any smarter out there. You have to come to terms with stupidity, and make it work for you."

 

[Jumpermonkey]

Thank you for your responses.
It seems strange that range programming isn't built in to the 11C software.

JumperMonkey

 

[phonedude10]

YOU CAN BUILD ONE SET AND THEN USE THE COPY COMMAND. THERE
ARE 4 DIFFERENT METHODS UNDER THE SFMT PROMPT AUTO-TN/DN-TN
OR DN. CHECK LD.10 AND 11 UNDER SET COPY

 

[1brc]

You can build several sets at one time.
ld 11
req new xx
type xxxx
sfmt choose tndn, tn, dn, auto auto will assign tns and dns in succession
tn whatever your first tn in succession
now build your first set. All will be the same tn and dn will follow suit.

 

[Jumpermonkey]

Thanks, Phonedude10 and 1brc!
I'll pass this on to our students and other instructors!

JumperMonkey