I have a media card that we are running a few IP phones off of that is in an option 11c. The individual that programmed it is long gone and cannot be reached. Is there any way I can reset the user name and password without losing the information. My client has changed their IP string and in need to make some changes. Also I would not be opposed to just wiping the card and starting from scratch if need be. I have the install docs and the tools to log in thru the maintenance port. Thanks for all your help.
Yes I have entered the BIOS via the reboot and JKL at the second line of commands as well as entered the help menu to access all of the short cut codes, but for some reason the ability to change the password and user name has escaped me. Im almost sure im inputting the information incorrectly. If you happen to have the input sequence available i would appreciate it but if not thanks for all your help thus far. I think I will be going back to the BIOS and do a little more research.
PS. the BIOS that i have is VxWorks 5.4 if that makes a difference.
Ive decided to print what Ive done in the BIOS thus far, but to no avail. For some reason I continue to get error codes back? Thank you to anyone who can shed some light at the end of this tunnel?
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.4
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.5
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2000
CPU: IXP1200. Processor #0.
Memory Size: 0x3b00000. BSP version 5.2.
-> help
help Print this list
ioHelp Print I/O utilities help info
dbgHelp Print debugger help info
nfsHelp Print nfs help info
netHelp Print network help info
spyHelp Print task histogrammer help info
timexHelp Print execution timer help info
h [n] Print (or set) shell history
i [task] Summary of tasks' TCBs
ti task Complete info on TCB for task
sp adr,args... Spawn a task, pri=100, opt=0, stk=20000
taskSpawn name,pri,opt,stk,adr,args... Spawn a task
td task Delete a task
ts task Suspend a task
tr task Resume a task
d [adr[,nunits[,width]]] Display memory
m adr[,width] Modify memory
mRegs [reg[,task]] Modify a task's registers interactively
pc [task] Return task's program counter
Type <CR> to continue, Q<CR> to stop:
iam "user"[,"passwd"] Set user name and passwd
whoami Print user name
devs List devices
ld [syms[,noAbort][,"name"]] Load stdin, or file, into memory
(syms = add symbols to table:
-1 = none, 0 = globals, 1 = all)
lkup ["substr"] List symbols in system symbol table
lkAddr address List symbol table entries near address
checkStack [task] List task stack sizes and usage
printErrno value Print the name of a status value
period secs,adr,args... Spawn task to call function periodically
repeat n,adr,args... Spawn task to call function n times (0=forever)
version Print VxWorks version info, and boot line
NOTE: Arguments specifying 'task' can be either task ID or name.
value = 1 = 0x1
-> whoami
target
value = 7 = 0x7
-> iam admin[,admin]
undefined symbol: admin
-> iam = admin[,admin]
syntax error
-> iam=admin[,admin]
syntax error
-> iam =admin[,admin]
syntax error
-> iam = admin[admin]
syntax error
-> iam admin[admin]
undefined symbol: admin
-> iam =admin[admin]
syntax error
->
As you can see Ive been trying to change the user/password to admin/admin but have not been able to do so....
Also i wanted to let everyone know that i have tried all of the usual passwords such as the admin1 password and itgadmin? Really what im trying to do now is reset everything.
Yes I have entered the BIOS via the reboot and JKL at the second line of commands as well as entered the help menu to access all of the short cut codes, but for some reason the ability to change the password and user name has escaped me. Im almost sure im inputting the information incorrectly. If you happen to have the input sequence available i would appreciate it but if not thanks for all your help thus far. I think I will be going back to the BIOS and do a little more research.
PS. the BIOS that i have is VxWorks 5.4 if that makes a difference.
Ive decided to print what Ive done in the BIOS thus far, but to no avail. For some reason I continue to get error codes back? Thank you to anyone who can shed some light at the end of this tunnel?
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.4
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.5
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2000
CPU: IXP1200. Processor #0.
Memory Size: 0x3b00000. BSP version 5.2.
-> help
help Print this list
ioHelp Print I/O utilities help info
dbgHelp Print debugger help info
nfsHelp Print nfs help info
netHelp Print network help info
spyHelp Print task histogrammer help info
timexHelp Print execution timer help info
h [n] Print (or set) shell history
i [task] Summary of tasks' TCBs
ti task Complete info on TCB for task
sp adr,args... Spawn a task, pri=100, opt=0, stk=20000
taskSpawn name,pri,opt,stk,adr,args... Spawn a task
td task Delete a task
ts task Suspend a task
tr task Resume a task
d [adr[,nunits[,width]]] Display memory
m adr[,width] Modify memory
mRegs [reg[,task]] Modify a task's registers interactively
pc [task] Return task's program counter
Type <CR> to continue, Q<CR> to stop:
iam "user"[,"passwd"] Set user name and passwd
whoami Print user name
devs List devices
ld [syms[,noAbort][,"name"]] Load stdin, or file, into memory
(syms = add symbols to table:
-1 = none, 0 = globals, 1 = all)
lkup ["substr"] List symbols in system symbol table
lkAddr address List symbol table entries near address
checkStack [task] List task stack sizes and usage
printErrno value Print the name of a status value
period secs,adr,args... Spawn task to call function periodically
repeat n,adr,args... Spawn task to call function n times (0=forever)
version Print VxWorks version info, and boot line
NOTE: Arguments specifying 'task' can be either task ID or name.
value = 1 = 0x1
-> whoami
target
value = 7 = 0x7
-> iam admin[,admin]
undefined symbol: admin
-> iam = admin[,admin]
syntax error
-> iam=admin[,admin]
syntax error
-> iam =admin[,admin]
syntax error
-> iam = admin[admin]
syntax error
-> iam admin[admin]
undefined symbol: admin
-> iam =admin[admin]
syntax error
->
As you can see Ive been trying to change the user/password to admin/admin but have not been able to do so....
Also i wanted to let everyone know that i have tried all of the usual passwords such as the admin1 password and itgadmin? Really what im trying to do now is reset everything.