Option 11c Intel PIMG port emulation issues

[FratorPR]

New install. PIMG 80 PBX DNI connecting to a Nortel Meridian 1 Option 11C. SIP connection to Cisco Unity Connection. When I click on Telephony on the PIMG appliance, the ports are showing "out of service waiting for link". We connected a Meridian 2616 phone to the PIMG side of the jumper from the PBX and the phone works fine for both inbound and outbound.

Intel PIMG version Information:
; Gateway Application (ROM): |5.1.70_36797| |FRI FEB 02 18:37:57 2007|
; Gateway Application: |5.1.70_36797| |FRI FEB 02 18:37:57 2007|
; Main Board Boot (ROM): |5.1.70N| |MON NOV 13 17:29:16 2006|
; DSP Firmware (ROM): |9.1 w/Fax| |FRI MAY 20 16:38:20 2005|
; DSP Firmware: |9.1 w/Fax| |FRI MAY 20 16:38:20 2005|
; Certificate Bundle (ROM): || |THU JAN 01 00:00:00 1970|
; Telephony Interface Application: 6.49
; Telephony Interface Firmware: Platform 3 Build 190
; Telephony Interface Boot: 6.0
; Telephony Interface ID: 2-Wire (0x0)
; Adept Config: Default

Anyone have a clue? This is my first time installing the Intel PIMG.