Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Option 11C How To Setup CPU for IP for OTM

Status
Not open for further replies.

PMcCallum50

Technical User
Mar 5, 2004
58
US
Familiar with setting up core 0 and core 1 on Opt 61C and 81C for IP to MAT and OTM. What hardware is needed to setup Option 11C? We use an AUI (DB15 to RJ45) transceiver on out big boys. What is used for the Option 11C?

Thanks
 
You use an AUI connected to the Stub cable provided on the Option 11 Ethernet interface. (To the left of the retaining bar in the bottom of the main cabinet). See page 209 of the Option 11C Planning and Installation Guide 553-3021-210.
 
stub cable - NTDK27AA / A0630723 - it is a male 50 pin Amphenol cable to a female DB15. you will be needing the AUI tranceiver as well.

cheers.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top