Option 11 rls 18 TDS/DTR

[gbertholdt]

I have an old meridian option 11 on rls 18, I’m trying to place it back in service but having problems producing dial tone. I have installed the cpu/conf card in slot 0, DTR card in slot 1, slots 2 3 4 have t-1 cards and the rest are digital, analog and universal cards, when I stat my dtr card it shows &quot;Disabled not responding TDS&quot; but all 8 ports are showing Idle, do I need a separate card for tds or is this controlled off the CPU card and if so how would I go about stating and or enable this. When I go to LD 22 and type prt <cr> cequ <cr> I get nothing, is there some other way to stat or prt conf/TDS. Please help!

 

[wolfi24]

In LD 32
stat 31 or 30 or 29



Wolfi

 

[Sennback]

Release 18..time to upgrade?!?!?!

You probably have a NTAK01BB SSC Card
You should also have a NTAK03DA TDS/DTR card in slot 1.
You also need a NT5K48GA Tone detect card in slot 2.

The cpu card doesnt do any of this functions in rel 18.

 

[wolfi24]

You should need a MFC card , for your 3 T1 cards

Wolfi