Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Option 11 PRI 1

Status
Not open for further replies.

lmman

Technical User
Aug 28, 2008
17
0
0
US
I've got an Opt11 that I have programed a PRI for interfacing to a BCM50. The span is not comming up, anyone know how this should be programmed?
 
this is the one i have working
Code:
TYPE RDB
CUST 00
ROUT 49

DES  PARKRIDGE
TKTP TIE
M911P NO
ESN  NO
CNVT NO
SAT  NO
IDEF NET
RCLS EXT
VTRK NO
NODE
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
    MODE PRA
    IFC  SL1
    PNI  00001
    NCNA YES
    NCRD YES
    TRO  NO
    CHTY BCH
    CTYP CDP
    INAC NO
    ISAR NO
    DAPC NO
DSEL 3VCE
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH RRB
TRMB YES
STEP
ACOD 8205
TCPP NO
TARG 05 06
CLEN 1
BILN NO
OABS
INST
IDC  NO
DCNO 0 *
NDNO 0
DEXT NO
ANTK
SIGO STD
ICIS YES
TIMR ICF  512
     OGF  512
     EOD  13952
     NRD  10112
     DDL  70
     ODT  4096
     RGV  640
     GRD  896
     SFB  3
     NBS  2048
     NBL  4096



PAGE 002

     IENB  5
     TFD  0
     VSS  0
     VGD  6
DRNG NO
CDR  YES
INC  YES
LAST YES
QREC NO
OAL  YES
AIA  NO
OAN  YES
OPD  NO
CDRX NO
NATL YES
VRAT NO
MUS  YES
MRT  10
RACD NO
EQAR NO
FRL  0 0
FRL  1 0
FRL  2 0
FRL  3 0
FRL  4 0
FRL  5 0
FRL  6 0
FRL  7 0
OHQ  NO
OHQT 00
CBQ  NO
AUTH NO
TDET NO
TTBL 0
ATAN NO
PLEV 2
ALRM NO
ART  0
SGRP 0
ARDN NO
AACR NO

the ifc type if primary.. the pni number needs to match on both ends

john poole
bellsouth business
columbia,sc
 
First off you need to decide where the problem is. Do you have a red alarm? If so then the problem is in the carrier i.e. T1 framing or physical wiring.

There are 2 parts to a T1

1. (consider this portion the ditch) is the physical portion and that is the carrier like ESF/B8ZS or what ever your framing happens to be. This needs to match at both ends.

2. This is the conduits in the ditch and you have 24 of them. What you put in the conduits is up to you DTI or PRI and must be programmed accordingly.

Without the first part or the ditch being completed then the 2nd part will never work no matter how many times you change the programming or try to bounce the circuit. You can't put conduits in the ditch before you dig it.

Signature===========================================

Aastra Authorized Reseller
 
Priceless analogy tnphoneman!

War Eagle!
Lions Baseball '09!
 
LMAO!! You're killin' me!

War Eagle!
Lions Baseball '09!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top