Option 11 INI help identifying cause 1

[hurricaneguy]

Could someone help me make sense of this. Our Option 11 INIed yesterday for no apparent reason. Fortunately this is at a remote location and no one even notice. But I want to make sure it does not happen again. My vendor is aware of the issue but they may take a while to look into this as it is not down at the moment.

Here is my Alarm History for this period.
% INI000 00000000 11 39 33 00000000 00000000 00000000 00000000 ? 00000000
% SDL5202
%
% DSET000 DOWN LOAD 0 0 0 0 0 0 0 00
%
% INI002 00000088
%
% INI003 0000009C 000000A0 000000AF 000000B0 000000B4 000000B8 000000CE
% ACDR ACTIVATED
%
% DCH1003 DCH: 5 PROTOCOL: 00000000 LAYER: 00000001 ERROR: 00000001
%
% AUD075 000CACC4 00000900 00000000 00000000 00000003 00001A94 00000000 00001A94
00000006
%
%
% AUD393 00001A94 000CAE54 000CAE54 00000000 00000000
%
% AUD399 00000005 00000015 00000015 000CAE54 000CAE54
%
% AUD000
%
% PRI227 DCH: 5 DATA: 00000007 CAUSE :NORMAL CALL CLEARING
%
% DTC103
%
% TIM000 11:53 1/7/2008 CPU 0
%
% DTC103

 

[hurricaneguy]

--> Issue and Release <--

ISSP

VERSION 2111
RELEASE 23
ISSUE 35

IN-SERVICE PATCHES : 0

 

[GHTROUT]

Not positive on this given the vendors response, but it seems to me that is the standard INI fault code following a power reset/sysload. If it's power, then at least you can work on reducing the chances of it occurring again. Someone else may be more familiar that I.

GHTROUT.com | FAQs | Recent Replies

 

[hurricaneguy]

Just talked to the vendor. He went and investigated. He could not find a reason but suspected power. Maybe our UPS is failing. Fortunately we are doing renovations at that location and part of that involves a large UPS for the whole IT room.