Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Optimising Flash for Director 1
- Thread starter pigrat
- Start date
-
1
- #2
Unfortunately no.
You will always notice a speed hit when used in Director.
What you can do is set the following properties for the Flash sprite:
Direct TO Stage: TRUE
Frame: Fixed
Frame Rate: 30
Not too sure of the wording of the properties, but should be pretty easy to find in the properties panel.
Mayuresh
You will always notice a speed hit when used in Director.
What you can do is set the following properties for the Flash sprite:
Direct TO Stage: TRUE
Frame: Fixed
Frame Rate: 30
Not too sure of the wording of the properties, but should be pretty easy to find in the properties panel.
Mayuresh
- Thread starter
- #3
- Thread starter
- #4
- Status
Similar threads
