Opt 11C Rls 24 - T-1 intermittent disconnect calls

[Stacyjo4]

OK We I'm looking at your basic 24 channel T-1 for local in/out calls. They are getting reports of intermittent disconnects on both received/placed calls. I have worked with local T-1 provider and have found no problems. They put a piece of in-line test gear on the circuit for 48 hours and although we had disconnected calls during this time period - there were no errors coming from the T-1 side or the switch side. I have rolled the T-1 card and the CSU and there was no change. Any ideas? Maybe a Nortel Product Bulletin you could point me toward - I am coming up with nothing!

Thanks!
Stacy

 

[PERRYPJ]

PRT OUT THE RDB FOR THE T1 GO DOWN TO TIMERS AND MAKE SURE THAT "TFD" IS SET TO 0

OLD ROLMEN WORKING ON NORTELS

 

[Stacyjo4]

OK, the TFD is set to 0 - I am pasting a copy of the RDB - do you see anything else I should change?

Thanks!
Stacy


TYPE RDB
CUST 00
DMOD
ROUT 0
DES DID
TKTP DID
M911_ANI NO
NPID_TBL_NUM 0
SAT NO
RCLS EXT
DTRK YES
BRIP NO
DGTP DTI
ISDN NO
DSEL VCE
PTYP DCO
AUTO NO
DNIS NO
ICOG IAO
RANX NO
SRCH LIN
TRMB YES
STEP
ACOD 8000
CPP NO
TARG 01
CLEN 1
BILN NO
OABS
INST
IDC YES
DCNO 1 *
NDNO 2
DEXT NO
DNAM YES
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GRD 896
SFB 3
IENB 5
TFD 0
VSS 0
VGD 6
SST 5 0
NEDC ETH
FEDC ETH
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG YES
NDRI 00
CDR YES
INC NO
LAST NO


PAGE 002

QREC NO
OAL YES
AIA YES
OAN YES
OPD NO
NATL YES
VRAT NO
MUS YES
MRT 5
MR NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
TTBL 0
OHTD NO
PLEV 2
MCTS NO
ALRM NO
ART 0
SGRP 0
AACR NO