Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OPT 11C, H IN FRONT OF AN EXT. 3

Status
Not open for further replies.

speedyboy

Vendor
Jan 14, 2005
10
0
0
US
When my users call from the Opt 11 to 61c there is an H in front each ext. Example H3155 or H3156. How can I take this off?
 
I can't wait to hear the answer for this. I have the exact same problem on my tieline. I never had it before until we took out the AT&T T1 tieline and put in an MCI T1 tieline.
 
From Nortel:
Solution ID: 1.0.15188587.2924349 Product Family: Enterprise Voice Create Date: 11/06/2000

Title:
Remove H in display on MCDN call

Facts:
PBX
MCDN

Symptoms:
H always appears in set display on MCDN call.
Orig DN in display is always proceeded with 'H'
Remove H in display on MCDN call


Cause:
See PRS BV70355


Fix:

Call CTS for PI patch MPLR09806

Hope this helps.

John
 
Product improvement patch by Nortel- your distributor should be able to assist
 
do you just get the h when you call mcdn? (mail) if you get it any other time, then get the patch and load it

john poole
bellsouth business
columbia,sc
 
When I call one of my far ends via the tie-line, the far end sees H1234. When far end calls me I see H5678.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top