opt 11 2

[rsteele]

how do i perform sys ini remotely?

 

[Avaya911PLM]

What release?
What system?
Why?

Are you sure you want to do that with no one at the site in case something goes wrong?

--
Fletch

Nortel Emergency Services PLM

http://nortel.com/e911

Don't forget about the FREE E911 Webinar Oct. 30th!
Register online at

http://thevoicereport.com/E911

 

[GHTROUT]

OHNO!



GHTROUT.com | FAQs | Recent Replies

 

[Avaya911PLM]

Good one Gene! I'll use my proposed new scale...

[!]Difficulty Scale[/!]
Are you SURE you know what you are doing?


--
Fletch

Nortel Emergency Services PLM

http://nortel.com/e911

Don't forget about the FREE E911 Webinar Oct. 30th!
Register online at

http://thevoicereport.com/E911

 

[GHTROUT]

Since it's been posted enough times, a remote sysload on an Option 11 can be found by searching "this forum only" for the term "XSL"

You will need a password - and you'll find it.

You can accomplish an ini in PDT using the "trp" command.

That password isn't posted here, but it in fact, is in the latest NTPs.

Either way, you should prefer that TTY 0 is the modem you are on while doing all of this - otherwise, you won't know if the INI or sysload is progressing as it should - until it finishes, which is often good enough.



GHTROUT.com | FAQs | Recent Replies

 

[wcmyers3]

actually, if you can login through PDT, you can use the reboot command for an ini and the reboot -1 for a sysload. I only do this on our 11's though.