Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OPT 11 to asterisk & name display

Status
Not open for further replies.

chrislxx

Technical User
Oct 4, 2007
50
US
Hi

A PRI is connected between a OPT 11 Succession 3 and a Asterisk.

Calls pass OK between the 2 switches, however the name display does not pass through.

I have used IFC = ISGF.

Attached below is my configuration. Please tell me if i have the Nortel settings correct.

Also i need the OPT11 to be the master Clock and the Asterisk to be looped clocked, please tell me if i have that set correctly.

Thank you in advance for any help.

Chris



DLOP NUM DCH FRM TMDI LCMT YALM T1TE TRSH
PRI 01 23 ESF NO B8S FDL - 00
02 24 ESF YES B8S FDL 0 00
MISP


ADAN DCH 10
CTYP DCHI
CARD 01
PORT 1
DES TOBURBANK
USR PRI
DCHL 1
OTBF 32
DRAT 64KC
CLOK EXT
NASA NO
IFC SL1
SIDE USR
CNEG 1
RLS ID 24
RCAP ND2 TAT
MBGA NO
OVLR NO
OVLS NO
T23 20
T200 3
T203 10
N200 3
N201 260
K 7


ADAN DCH 22
CTYP TMDI
CARD 02
PORT 1
DES
USR PRI
DCHL 2
OTBF 32
PARM RS232 DTE
DRAT 64KC
CLOK EXT
IFC ISGF
PINX_CUST 0
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE NET
CNEG 1
RLS ID 24
RCAP COLP NDI CCBI CCNI PRI DV3I CTI QMWI
PR_TRIGS DIV 2 3
CNG 2 3
PR_RTN NO
MBGA NO
OVLR NO
OVLS NO
T310 120
T200 3
T203 10
N200 3
N201 260
K 7




TYPE RDB
CUST 00
DMOD
ROUT 22
DES ASTERISK
TKTP TIE
NPID_TBL_NUM 0
ESN NO
CNVT NO
SAT NO
RCLS EXT
VTRK NO
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC ISGF
SBN NO
PNI 00000
NCNA NO
NCRD NO
CHTY BCH
CTYP UKWN
INAC NO
ISAR NO
CPFXS YES
DAPC NO
INTC NO
DSEL 3VCE
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 6022
TCPP NO
TARG
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
ANTK
SIGO STD
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
NBS 2048

NBL 4096

IENB 5
TFD 0
VSS 0
VGD 6
DRNG NO
CDR NO
VRAT NO
MUS NO
EQAR NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
CBQ NO
AUTH NO
TTBL 0
ATAN NO
PLEV 2
ALRM NO
ART 0
SGRP 0
AACR NO


REQ:
 
The RCAP setting tends to be where most faults are with Name errors. You will need to disable the D Channel first before you can make the RCAP change to ND2.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

If it's working, then leave it alone!.
 
Thank you for responding
I get a SCH0531 error when I try to add ND2.
SCH0531 Action: the RCAP entry point in ovl 16 has been answered NDS when QSUr QSIG GF are not accessible or with an inappropriate interface configured.
Please can someone tell me what I have configured incorrectly?
Chris
 
-Disable the Dchannel
-Delete all entry in Rcap
-ND2 first and then enter the rest.

Villareal
 
Hi

Thank you for the suggestion.

i tried complexly outing the DCH and the first thing i tried was to put ND2 in the RCAP still the same error.

Chris
 
LD 16- RDB

NCNA yes
NCRD yes

SCH 0531
Unable to match input with stored mnemonics.
Reconfigure accordingly.

Villareal
 
Thank you for responding.

I did not get the option to change NCNA and NCRD in LD 16.

so I deleted the RSB and recreated it, it did not prompt for those options.

However now I have name display when Nortel calls Asterisk, on the asterisk.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top