Opt 11 Ringing cycle options

[kooltech]

Hi

I'm having some trouble with ringing cycle options. From reading the past posts - I thought all I had to do was go in to LD 15 and change the CFN to the required number of rings. However this didn't work as expected. Internal calls would ring 4 times and go to VM external call would only ring once? This only affected anolouge sets.

The sets I wanted to change were digital so I also played about with DFN, but it didn't seem to have any effect.

Can anyone offer any advice on where I'm going wrong - and can you set diffrent options for external / internal calls?

Below is list of some of my settings
YPE CDB
CUST 00
LDN0 6169
LDN1 6559
PKND 2
NIT1 5005
TIM1
NIT2
TIM2
NIT3
TIM3
NIT4
TIM4
RPNS NO
SPRE 12
ATDN 0
NCOS 7
OPT LOD CTA IC1 SYA
XTG IDP XLF CFO
MCI MWUD ROX CPA IHA
DSX LRA HTU DNX
COX XBL SBD DBA
RTR RTD HVA CFRA AHA REA
PCMD BLA SLD RNA FACD BIXA EBIN
ABDD FKA SDDE BOHA DSTD
DNCA SIAD CHDD PVCA TTAA XLDN
VOBD
ACCD OVF OVF OVF OVF
CTVN OVF OVF OVF OVF
MBNR OVF OVF OVF OVF
CTRC OVF NAP OVF NAP
CLDN NAP OVF NAP NAP
NINV OVF OVF OVF OVF
NITR OVF OVF OVF OVF
NRES OVF OVF OVF OVF
NBLK BSY BSY BSY BSY
UBRI OVF NAP NAP NAP
LCKT BSY BSY BSY BSY
RCLE OVF OVF OVF OVF
RTIM 25 24 24
IMPH NO
OMPH NO
CDR YES
AXID YES
TRCR YES
CDPR YES
ECDR NO
OTCR NO
PORT 1
ICI 00 R100
ICI 01 LD0
ICI 02 LD1
ICI 03 LD2
ICI 04 DL0
ICI 05 RLL
ICI 06 LCT
ICI 07 CFN
ICI 08 CFB
ICI 09 INT
IMS YES
IMA YES
APL NONE


PAGE 002

UST NO
APL NONE
UMG NO
APL NONE
FLSH 80 200
RALL NO
CDTO 14
IFLS NO
MHLD NO
CNFD 1
TGLD 2
DISD 3
CCDO NO
RGNA AAR AAR
AOCS OVF OVF
RCY1 06
RCY2 04
ACNS NO
CHLN 4
PREO 0
FCAF NO
FNAD FDN
FNAT FDN
FNAL FDN
CFN0 4
CFN1 1
CFN2 8
CFTA NO
DFN0 3
DFN1 1
DFN2 1
TRCL 0
DFNR 0
PHDT 30
SRCD 0000
ATAC NONE
RTSA RSAX
IRFR NO
XRFR NO
CWUP YES
CWCL 2 4
CWTM 10 20
CWBZ NO NO
EFLL 0
DNDT BST
DNDH NO
CCRS UNR
MDID NO
NDID NO
MWFB NO
MATT NO
CONG BUSY
LLT OFA
ODN0
ODN1
ODN2
ODN3
ODN4
ODN5
ODN6
ODN7
ODN8

Any help much appreciated

 

[bigindian65]

It's cofigured via the RCO (0, 1 or 2)prompt on the set.
The RCO prompt is related to the CFN0, CFN1, CFN2 and the DFN0, DFN1, DFN2.
If CFN2 and DFN2 are configured with a 9 and your set has configured with RCO 2 your phone is going to your voicemail after 9 rings

CFN0
CFN1
CFN2
DFN0
DFN1
DFN2


CFN0 3 ############ (Internal Rings = 3)
CFN1 10
CFN2 14
DFN0 6 ############ (External Rings = 6)

Are configured in LD 15 RDR datablock

Mato' Was'aka

 

[kooltech]

Hi Thanks

- Thats what I thought , but it doesn't seem to work that way on our system?

Internal & external calls seem to behave diffrently also digital & anolouge diffrent to.

Any idea why or what I need to change to rectify it.

 

[janaya]

did you change the RCO option on the actual telephone set? If not it won't change the way the phone rings. You will match up the RCO with the DFN and CFN prompts.

JOhn

 

[kooltech]

hi John thanks for your input

Yes I set the RCO on the TN's but I cant understand why the phone behaves diffrent on internal and external calls? ie it was ringing 4 cycles on internal calls but going to voicemail after 1 ring on external calls.

And anolouge diffrent fron digital -Changing CFN din't seem to alter digital ring cycles, are digital handsets controlled by DFN rather than CFN?

 

[bigindian65]

CFN0 4 <---CFN = Internal rings
CFN1 1
CFN2 8
CFTA NO
DFN0 3 <---DFN = external rings
DFN1 1
DFN2 1

Mato' Was'aka

 

[bigindian65]

If you want it same I E,
CFN1 6
DFN1 6

RCO on set - 1



Mato' Was'aka

 

[kooltech]

THANKS

I will have another go tomorrow, and let you know how I get on.

 

[kooltech]

hi

All working fine now. - thanks for your help.

No doubt I will be back soon - as I am still trying to get to grips with PBX programming.

 

[yyrkroon]

DFN0 1-(4)-15 Number of distinctive ringing cycles for CFNA,
Option 0

How is DFN0-2 = for external calls???

DFN0-1 is for people that activated distinctive ringing by dn, when did it became for external calls and CFN0-2 is for internal calls?

 

[kooltech]

Hi Yyrkroon

Thats what I thought, but on my PBX DFNO seems to control external ringing - thats what had me stumped. When I set DFNO to 1 all external calls on sets( DIGITAL & ANOLOUGE) with a RCO1 went to voicemail after 1 ring cycle.

Not sure if my pbx is set up diffrent to normal?

 

[yyrkroon]

Kooltech,

Not sure if you changed your CFN and DFN back to what they were, but I can see where RCO 1 would 1 ring cycle since your last printout you have CFN1 = 1 ring.

From your CDB above:

FNAL FDN
CFN0 4 = 4 rings if RCO 0
CFN1 1 = 1 ring if RCO 1
CFN2 8
CFTA NO
DFN0 3
DFN1 1
DFN2 1