OPT 11 connected with Reflections cursor problem

[bradcrf]

Hello,

I have a new laptop with Reflections terminal program. When I use a modem connection to an Option 11 (CS1000) my cursor apprears properly. When I use a serial connection, I connect but my cursor is not there. Everything I type is one character behind. I am using the same settings as my old laptop for the reflections program and the same USB to serial adapter. 9600 8n1 etc. Any ideas?

 

[30n30w]

download puTTY.exe (

http://www.putty.org/)

and try it - I suspect it's reflections that's the issue, but I could be wrong. You can also set up the CS1000 to allow Rlogin via TCP/IP and eliminate the modem/serial connection - puTTY also has an Rlogin feature.
good luck
30n30w

 

[bradcrf]

Thanks for the info

Brad