bigguyhawaii
Vendor
we're upgrading a opt 11e to a cs1000 5.50j. new cab 0, new ssc, programmed the ssc and fat fingered the data base in our lab. however, after installing the new cab and sloting the ssc card i'm unable to get the elan enabled. i get a mem215 error. i reloaded the card back in the lab and i was able to enable to elan in ld 48. but at site i am still getting the mem215 and the elan stays disabled. i fbugged the card and reloaded the os and restored the database on site but still got the error. the only difference between the lab and the site is the new cab and the old power supply which is MD but should be compatible. calling nortel in the morning but just wanted to see if anyone had any ideas. thanks.