OPI-II

[bpczi]

Hi!

I have a problem with an opi. I have got a elu28 and i think it is a OPI-II (where can i find out, if it is a symbolic opi or an opi-II?). I did operi. I always get following alarm and the opi is ringing continuously.


DATE: 28OCT05 TIME: 21:35:12
CLASS: 3
261 NO CONNECTION WITH OPERATOR CONSOLE
DATE TIME ALP NOIF EQU BRDID INF1
28OCT05 21:31:57 1 1 001-0-42-00 77 9


<opddp:dir=901; OPERATOR DIRECTORY DATA
DIR EQU OCUST TYPE PCM REV
901 001-0-42-00 - 5 1 -


I hope that you can help me, I don`t know what to do.

Best regards

bpczi

 

[doktor]

The programming for OPI-II connected to an ELU-28 board is made correct. The Operator console OPI-II has TYPE=5.
Have you checked BLFDP; for further info?
To check the ELU-28 board and poisition, I always (when there are some faults) connect an e.g. Dialog 2661 (or other Ericsson keyset)to the EQU position.
Maybe you have a faulty OPI-II.

Good luck. Doktor

 

[bpczi]

hi!

thank you very much! the opi was not connected to the equ i had programmed. i feel very sheepish about it!
good evening!

best regards

bpczi