Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Operators (5550) won't failback after restart Controller 1

Status
Not open for further replies.

Layne5

Technical User
Aug 8, 2008
50
BE
Hi, today one of our resilient controllers restarted (8.0UR5). The second controller took over BUT when the first became active again, the extensions didn't failback automatically to the first. LOAD IPDEVICE 1 TO 999 solved this for most extensions, except for the OPERATOR 5550 Consoles. They are still running on the second, which will give a problem if they switch into NIGHT. LOAD IPDEVICE didn't solve this, they are still running on the second. Is there another command to FORCE this failback? Thnx for your help! J.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top