Operator Assisted

[felon]

I would like to block all operated assisted calls on our Option 61c.

Can someone please prompt me through the LD's to do this?

Thanks

 

[johnpoole]

you can print att data in ld 21, and make changes in ld 15, chg att

TYPE ATT_DATA
CUST 00
OPT AHD BIND BIXA BLA
    DNX IC1 ITG IDP XLF XBL
    FKA MWUD LOD
    REA SYA ATDA
ATDN 1108
[COLOR=red][b]NCOS 0[/b][/color]
CWUP YES
CWCL 256 1
CWTM 0 0
CWBZ YES YES
EFLL 0
MATT NO
RTIM 30 30 30
ATIM 0
AQTT 0
AODN
SPVC 00
  SBLF NO
RTSA RSAD
SACP SNGL
ABDN NO
IRFR NO
XRFR NO
IDBZ NO
PBUZ 02  10
ICI 00 LD0 NCO NDID NTIE NFEX NWAT
ICI 01 LD1
ICI 02 IAT
ICI 03 RLL
ICI 04 DL0
ICI 05 INT
ICI 06
ICI 07
ICI 08
ICI 09
RICI

that ncos in my 81 is set to allow 911 and 1800 877 type calls, personal calls must be done in the supervisors office. with that ncos, that problem is solved. the chief operator has a 3904 that she can use for operator assisted if she needs to. she sometimes needs to allow a international for a user

john poole
bellsouth business
columbia,sc

 

[Reusser]

Operator assisted calls are normally accessed by dialing 0 and a number or just 0.

If you remove the 0+ or just 0 from dialing plan you should be able to acomplish your Goal.

LD 90
Reg: Prt
Feat: Net
Tran: AC1
Type: SPN
SPN: <cr>

this will print all special numbers where your 0 and 0+ number would be programmed. See what is there and out what you want to restrict

LD 90
Reg: OUT
Feat: Net
Tran: AC1
Type: SPN
SPN: 0 <-- or what ever number you are removing

 

[johnpoole]

that works for some sites, but at my site, a hosp or even a hotel, it might be an option

john poole
bellsouth business
columbia,sc