I have a Compaq DL320 G1 (P3 733, 512Mb, SCSI disks) and I am trying to get CCM 3.3(3) installed. I can't do the 'proper' install using the hardware detection disks etc since I have the SCSI controller in the DL320 and the CD images are only for a DL320 with IDE. Anyway I have SmartStart 5.50 and Windows 200 Server. I do a normal SmartStart install of Windows 2000 server and this works OK. I then apply SP3 and install IE6. Up to this point everything is OK. I then apply the registry hack:
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model]
"Hardware"="MCS7835"
"Memory"="1024"
"Speed"="733"
[HKEY_LOCAL_MACHINE\SOFTWARE\Spirian\System Info\OS Image]
"Version"="2000.2.4"
After this I install the 'win-OS-Upgrade-K9.2000-2-6.exe'. After a couple of reboots the server is back up - for a few seconds......... A few seconds after the logon screen appears it blue screens with a paging fault.
I have re-installed from scratch about 5 times now and each time I get the same thing.
Any ideas?
Andy
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems\Model]
"Hardware"="MCS7835"
"Memory"="1024"
"Speed"="733"
[HKEY_LOCAL_MACHINE\SOFTWARE\Spirian\System Info\OS Image]
"Version"="2000.2.4"
After this I install the 'win-OS-Upgrade-K9.2000-2-6.exe'. After a couple of reboots the server is back up - for a few seconds......... A few seconds after the logon screen appears it blue screens with a paging fault.
I have re-installed from scratch about 5 times now and each time I get the same thing.
Any ideas?
Andy