Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

openVPN client on Win 7

Status
Not open for further replies.

nosecret

Technical User
Jun 27, 2011
1
NL
Hi,

I setup openVPN using fedora 11 and it's working. But on client site, it show some error.

I still working on it but still don't have any solutions. This is client log.
Code:
Mon Jun 27 15:29:49 2011 OpenVPN 2.0.9 Win32-MinGW [SSL] [LZO] built on Oct  1 2006
Mon Jun 27 15:29:49 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA.  OpenVPN 2.0-beta16 and earlier used 5000 as the default port.
Mon Jun 27 15:29:49 2011 LZO compression initialized
Mon Jun 27 15:29:49 2011 Attempting to establish TCP connection with 184.22.251.xxx:443
Mon Jun 27 15:29:49 2011 TCP connection established with 184.22.251.xxx:443
Mon Jun 27 15:29:49 2011 TCPv4_CLIENT link local: [undef]
Mon Jun 27 15:29:49 2011 TCPv4_CLIENT link remote: 184.22.251.xxx:443
Mon Jun 27 15:29:55 2011 [servername] Peer Connection Initiated with 184.22.251.xxx:443
Mon Jun 27 15:29:57 2011 Options error: Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:2: topology (2.0.9)
Mon Jun 27 15:29:57 2011 TAP-WIN32 device [Local Area Connection 2] opened: \\.\Global\{359257A5-B776-4CA4-9376-EA24BAC713ED}.tap
Mon Jun 27 15:29:57 2011 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.8.0.6/255.255.255.252 on interface {359257A5-B776-4CA4-9376-EA24BAC713ED} [DHCP-serv: 10.8.0.5, lease-time: 31536000]
Mon Jun 27 15:29:57 2011 NOTE: FlushIpNetTable failed on interface [31] {359257A5-B776-4CA4-9376-EA24BAC713ED} (status=1168) : Element not found.  
Mon Jun 27 15:30:26 2011 Warning: route gateway is not reachable on any active network adapters: 10.8.0.5
Mon Jun 27 15:30:26 2011 Initialization Sequence Completed With Errors ( see [URL unfurl="true"]http://openvpn.net/faq.html#dhcpclientserv[/URL] )
Please assist me. Thanks.
 
Options error: Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:2: topology (2.0.9)
One of the options you are trying to push to the client is apparently not supported on Windows. Normally, one pushes route options to redirect the gateway to the VPN. You may have a syntax error in your configuration. This is substantiated by:
Warning: route gateway is not reachable on any active network adapters: 10.8.0.5
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top