Hello,
Recently I have had a problem appear in three seperate instances using an HP Jetdirect 300x external print server. In all cases they are connected to an HP Laserjer 4250 or 4350 printer under Openserver 5.0.7.
The print job starts, stops then starts over. In all cases the print job does complete. These printers are configured as a Unix network printer using tcp/ip. They are otherwise working normally as Windows printers.
If anybody has seen a similar issue or knows of any fix for this I would appreciate hearing from you. So far I have not been able to find any references to this problem on the HP or SCO sites.
Regards,
John.
Recently I have had a problem appear in three seperate instances using an HP Jetdirect 300x external print server. In all cases they are connected to an HP Laserjer 4250 or 4350 printer under Openserver 5.0.7.
The print job starts, stops then starts over. In all cases the print job does complete. These printers are configured as a Unix network printer using tcp/ip. They are otherwise working normally as Windows printers.
If anybody has seen a similar issue or knows of any fix for this I would appreciate hearing from you. So far I have not been able to find any references to this problem on the HP or SCO sites.
Regards,
John.