Hi,
I have a problem with the STMI board that describes HFA subscribers with the SPE encryption feature. STMI is described as HG3530.
If all subscribers work on TCP protocol, everything is ok. If I enable TLS for subscribers, after a while I get the following SNMP trap from the STMI card:
"14:13:29 04/06/20 0 172.17.0.14 10714291 1.3.6.1.4.1.231.7.2.7.13.3.2.8 6 1 pn.7.13.3.2.12 String Warning pn.7.13.3.2.9 String MSG_OAM_RAM_THRESHOLD_REACHED pn.7.13.3.2.10 String EventLogEntry from SYSTEM (tOAMTask "04/06/2020 14:13:39.974218" cpercthreshold01.cpp 185): EventType: Warning EventCode: MSG_OAM_RAM_THRESHOLD_REACHED EventText: High WaterMark "Used System Memory" reached: Configured: 90% Current: 90% of 89622888 (Byte) pn.7.13.3.2.11 Integer 1"
WBM:
STMI also performs a soft reset once a day. HISTA does not show anything except HFA subscribers OUT SERV.
31 subscribers are configured on this board. Loadware updated to pzksti40.A5.002-018.
Any ideas?
I have a problem with the STMI board that describes HFA subscribers with the SPE encryption feature. STMI is described as HG3530.
If all subscribers work on TCP protocol, everything is ok. If I enable TLS for subscribers, after a while I get the following SNMP trap from the STMI card:
"14:13:29 04/06/20 0 172.17.0.14 10714291 1.3.6.1.4.1.231.7.2.7.13.3.2.8 6 1 pn.7.13.3.2.12 String Warning pn.7.13.3.2.9 String MSG_OAM_RAM_THRESHOLD_REACHED pn.7.13.3.2.10 String EventLogEntry from SYSTEM (tOAMTask "04/06/2020 14:13:39.974218" cpercthreshold01.cpp 185): EventType: Warning EventCode: MSG_OAM_RAM_THRESHOLD_REACHED EventText: High WaterMark "Used System Memory" reached: Configured: 90% Current: 90% of 89622888 (Byte) pn.7.13.3.2.11 Integer 1"
WBM:
STMI also performs a soft reset once a day. HISTA does not show anything except HFA subscribers OUT SERV.
31 subscribers are configured on this board. Loadware updated to pzksti40.A5.002-018.
Any ideas?