Openscape 4000 to AVAYA AURA

[Hertz]

Hi,

I got a OPENSCAPE 4000 V7 in my company that I worked for. And currently planning to setup a communication link to a different PBX(Avaya Aura I believe). I got the idea that I need to configure the link working on HG-SIP on my side and also on the other side(avaya).

Does anybody here have the current setup? is it working fine?
If yes please share your thoughts on how i can establish it. Because I only got here for around 6mons with a little knowledge of the UNIFY pbx

Best
Hertz

 

[sbcsu]

If you are starting from only 6 months experience of 4K it would be best to get a colleague or Unify rep to setup and test.

Basically you will need an STMI card and an IP Switch.
The trunk has to be programmed like an Xpressions Voicemail Link
Some programming to be done for routing, and some on the IP card as well.
A bit too much for it to be straight forward if you know what I mean.

 

[thepfy]

There's some Avaya documents for Hipath V5 and SIP

https://www.devconnectprogram.com/fileMedia/download/3736caec-0a79-4b0b-b125-1efda762ac7f

https://www.devconnectprogram.com/fileMedia/download/e2b683f2-9dcd-454d-97bc-e950b122ed32