Dear all,
I integrated Openscape 4000 V6 with Cisco call manager through E1 (DIUT2)connectivity.
I am facing one issue here and if any one can help me resolve this issue.
Extension to extension from both side working fine
From cisco the analog trunks connected in Openscape 4000 is using for outgoing and there is no any problem.
[highlight #CC0000]But for incoming calls
[highlight #CC0000]External caller called Openscape 4000 system and dialing the cisco extension,the call is transferring to cisco extension and ring once and disconnecting.[/highlight][highlight #CC0000][highlight #CC0000][/highlight][/highlight]
Please any one can help me to resolve this issue.
Thanks
I integrated Openscape 4000 V6 with Cisco call manager through E1 (DIUT2)connectivity.
I am facing one issue here and if any one can help me resolve this issue.
Extension to extension from both side working fine
From cisco the analog trunks connected in Openscape 4000 is using for outgoing and there is no any problem.
[highlight #CC0000]But for incoming calls
[highlight #CC0000]External caller called Openscape 4000 system and dialing the cisco extension,the call is transferring to cisco extension and ring once and disconnecting.[/highlight][highlight #CC0000][highlight #CC0000][/highlight][/highlight]
Please any one can help me to resolve this issue.
Thanks