Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OPCION 61

Status
Not open for further replies.

jftg73

Technical User
Aug 7, 2003
200
MX
HI, I HAVE AN OP. 61 RLS 17.73 CPU 0 IS LOW AND CPU 1 IS UP BUT WE DO MAINTENANCE AND REMOVE ALL CARD AND REINSTALL WE SAW THAT CPU 0 IS UP AND CPU 1 LOW, ANYBODY KNOW WHY?

I HAVE IDEA THAT CARDS FROM CPU IS NOT IN ORDER BUT IF YOU ASISTME I WILL BE GRATEFUL.
 
Don't quite get what you mean.
Only 1 CPU can be up at one time.
If
LD 137 sync
LD 135 scpu
works you should be fine.
 
This is not a core machine so LD's 135 & 137 won't work, not even developed for a rls. 17 machine.

All work on CPU's will need to be done in LD 35.

Just curious but are you ever planning to upgrade this machine?
 
ok i has a power failure in the office and pbx was down, i replace cards damage for goods and recharge software and then my pbx it so.

The cpu are not core.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top