OPC81 SwitchOver from CPU1 to CPU0

[angel1981]

Hi Guys,

I had this issue today.

I got this alarm from my CLI.

SWO: Graceful switch-over from side 1 to side 0 completed Previous Graceful SWO: at 16/6/11 16:34:38

It is known that this was a SwitchOver. I tried to find any similar issues in the Tek Tips web, but there are not clear results.

in addition, before this happened I recieve this weird alarm:

vtServerRx: tcp Status = 5, TCP socket error treat it as a connection loss and send an error message to RUDP.
697825
24/06/2011
14:09:07
Mayor
ELAN
025
tcp error: tcp write fail too many times!! ERRNO is 70.


Thanks in advance

 

[PERRYPJ]

The switchover took place on the 16th of June at 4:34pm and the other one was yesterday at 2:09 are sure sure there is nothing else in between.

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[Firebird Scrambler]

I had a customer with a v04.50 CPP4 Option 81c system that used to switch over for no reason. By chance it started when I had connected up the unused Sig Server ELAN for rlogin access. I removed it and it's been OK since then.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[jaxuser]

Are your PEPs up to date? There are several out there for this issue but I don't have the info on them. I have had a couple of systems doing the same thing and loading lastest DEPLIST corrected all of them.