Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OP11C OS restart

Status
Not open for further replies.
maripaq

maripaq

Technical User
Jul 29, 2003
138
CA
I just setup a DTI link between an OP11C and an 81C, both running rlse 25.40. I'm using a 1.5mb DTI/PRI card in the 11C and a DDP in the 81C. I have a fiber link for the T1 span between the 2 systems. On both systems, the DTI loop will come up on a loopback but won't come up when talking one another. Worst then that, as soon as I remove the bidirectionnal loopback on the FO modem, the OP11C does an OS restart! Any idea anyone?
 
Sort by date Sort by votes
are the transmit and receive between the two systems (on fiber with interface I hope) transposed. Trans of one to the rec of two? If not they must be. are they set up the same (esf-b8zs) (d4-ami) and what does the fiber interface provide you with esf? d4? Need more information
 
Upvote 0 Downvote
Yes the tx and rx are transposed. I programmed DSC's in both systems and I was able to make a call from the 81C to the 11C but then I got a yellow alarm on both sides and the members on each DTI loop went DSBL. I put a bidirectionnal loopback on one of the modem and the yellow alarm disapeared on both sides and the trunks went IDLE. Now as soon as I remove the bidirectionnal loopback on the modem, the OP11C does an OS Restart (warm reboot). Both sides are configured ESF - B8Z - FDL. It's too bad I'm not at work right now, I would have post a print-out of the PARM, the RDB and the Trunk members. I'll do it on monday for sure.

Thanks unkalary. Hope you can help me with this one...
 
Upvote 0 Downvote
Hi

I have option 11c mini i want an expansion cabinet connect to the main cabinet any idea on the pin configuration of the RS232 connector for the connectivity of the main cabinet and expansion cabinet...thanks for any help.


Ogiarda

 
Upvote 0 Downvote
As promised, here's a print-out of both systems starting with the OP11C:

OP11C


REQ: prt
TYPE: tnb
TN 1 1
DATE
PAGE
DES

DES TIEOP81C
TN 001 01
TYPE TIE
CUST 0
TRK DTI
PDCA 1
PCML MU
NCOS 0
RTMB 1 1
TGAR 0
SIGL EM4
STRI/STRO WNK WNK
SUPN YES
AST NO
IAPG 0
CLS CTD DTN CND ECD WTA LPR APN THFD HKD
P10 VNL
TKID
DATE 6 AUG 2004


NACT ****
OVL000
>ld 21
PT1000

REQ: prt
TYPE: rdb
CUST 0
ROUT 1

TYPE RDB
CUST 00
DMOD
ROUT 1
DES TIEOP81C
TKTP TIE
NPID_TBL_NUM 0
ESN NO
CNVT NO
SAT NO
RCLS EXT
DTRK YES
BRIP NO
DGTP DTI
ISDN NO
DSEL VOD
PTYP DTT
AUTO NO
DNIS NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 7000
TARG 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
CLEN 1
BILN NO
OABS
INST
ANTK
SIGO STD
STYP SDAT
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ORG
FEDC ORG
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
DRNG NO
CDR NO
MUS NO
MANO NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
CBQ NO
AUTH NO
TTBL 0
ATAN NO
OHTD NO
PLEV 2
ALRM NO
ART 0
SGRP 0
AACR NO

REQ: ****
OVL000
>ld 22
PT2000
MARP NOT ACTIVATED


REQ prt
TYPE parm


PARM
LPIB 192
HPIB 32
500B 16
NCR 200
MGCR NULL
CSQI 020
CSQO 020
TUBO NO
CFWS NO
PCML MU
ALRM YES
ERRM ERR BUG AUD
DTRB 100
TMRK 128
FCDR OLD
PCDR NO
TPO NO
TSO NO
CLID NO
DUR5 NO
MLDN YES
MARP NO
FRPT NEFR
DCUS NULL
MSCL 255
PMSI
MANU PMS1
PMCR 20
PORT NONE
NDIS 20
OCAC NO
MTRO MR
SBA_ADM_INS 001
SBA_USER 010
BCAP SPEECH
NORTEL_BRAND YES
IDLE_SET_DISPLAY NORTEL
CLNP YES
CEQU
MPED 8D
SUPL 000 004 008 012



PAGE 002

016 032 036 040
044 048 064 068
072
XCT 000
CONF 029 030 031 062
094 095

DLOP NUM DCH FRM LCMT YALM T1TE TRSH
TRK 01 24 ESF B8S FDL - 09
MISP
OVLY
SID 0
BKGD 044
PBXH 01
TODR 23
DROL 030 034 038 044 135
MULTI_USER OFF
VAS
VSID 09
DLOP
AML 09
SECU NO
INTL 0001
MCNT 9999
CONF DIR
ATRN
CODE 0
SOLR 12
ROLR +45.00
AOLR +45.00
TOLR -45.00
AGCD NO
VOLR NO
HRLR +42.00
HTLR -44.00

OP81C

REQ: prt
TYPE: tnb
TN 19 1
SPWD
DATE
PAGE
DES

DES ACM
TN 019 01
TYPE TIE
CUST 0
NCOS 0
RTMB 61 1
A/B BIT SIGNALING
TGAR 0
SIGL EM4
STRI/STRO WNK WNK
SUPN YES
AST NO
IAPG 0
CLS CTD DTN CND ECD WTA LPR APN THFD HKD
P10 VNL
TKID
DATE NO DATE


NACT ****
OVL000
>ld 21
PT1000

REQ: prt
TYPE: rdb
CUST 0
ROUT 61

TYPE RDB
CUST 00
ROUT 61
DES OP11LAB
TKTP TIE
NPID_TBL_NUM 0
ESN NO
CNVT NO
SAT NO
RCLS EXT
DTRK YES
DGTP DTI
ISDN NO
DSEL VOD
PTYP DTT
AUTO NO
ICOG IAO
PREM NO
SRCH LIN
TRMB YES
STEP
ACOD 8461
TARG 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
SIGO STD
STYP SDAT
TIMR ICF 384
OGF 384
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
TFD 0
SST 5 0
NEDC ETH
FEDC ETH
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02
SVFL 02 02
CDR NO
MUS NO
RACD NO
MANO NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
CBQ NO
AUTH NO
TTBL 0
ATAN NO
OHTD NO
ALRM NO
ART 0
AACR NO

REQ: ****
OVL000
>ld 22
PT2000
MARP NOT ACTIVATED


REQ prt
TYPE parm

PARM
LPIB 3500
HPIB 3500
500B 2000
SL1B 255
NCR 10000
MGCR NULL
CSQI 255
CSQO 255
TUBO NO
CFWS YES
PCML MU
ALRM NO
ERRM ERR BUG AUD
DTRB 100
TMRK 128
FCDR OLD
PCDR NO
TPO NO
TSO NO
CLID YES
DUR5 NO
MLDN YES
MARP NO
FRPT NEFR
DCUS NULL
MSCL 255
PMSI
MANU PMS1
PMCR 60
PORT NONE
NDIS 20
OCAC NO
SBA_ADM_INS 002
SBA_USER 100
BCAP SPEECH
NORTEL_BRAND NO

REQ prt
TYPE cfn


ADAN DCH 11
CTYP DCHI
GRP 1
DNUM 11
DES 9574-M11ST-MALO
USR ISLD
ISLM 12
OTBF 32
CLOK EXT
NASA NO
IFC SL1
SIDE NET
SEMT 1
CNEG 1
RLS ID 23
RCAP ND2
T23 20
T200 3
T203 10
N200 3
N201 260
K 7
ADAN DCH 29
CTYP MSDL
GRP 1
DNUM 14
PORT 0
DES lauretville
USR PRI
DCHL 34
OTBF 42
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC D100
SIDE USR
CNEG 1
RLS ID **
RCAP ND2
PRI INTERFACE ID
051 2
035 3
018 4
T200 3
T203 10
N200 3
N201 260
K 7
PARM
LPIB 3500
HPIB 3500
500B 2000
SL1B 255
NCR 10000
MGCR NULL
CSQI 255
CSQO 255
TUBO NO
CFWS YES
PCML MU
ALRM NO
ERRM ERR BUG AUD
DTRB 100
TMRK 128
FCDR OLD
PCDR NO
TPO NO
TSO NO
CLID YES
DUR5 NO
MLDN YES
MARP NO
FRPT NEFR
DCUS NULL
MSCL 255
PMSI
MANU PMS1
PMCR 60
PORT NONE
NDIS 20
OCAC NO
SBA_ADM_INS 002
SBA_USER 100
BCAP SPEECH
NORTEL_BRAND NO
CEQU
MPED 8D
TERM
REMO
TERD 056 057
REMD
TERQ
REMQ
SUPL 004 008 012 020
024 028 036 040
044 052 060 068
072 076 084 088
092 100 104 108
116 120 124
XCT 000 016 032 048
064 080 096 112
TDS * 000 * 016 * 032 * 048
* 064 * 080 * 096 * 112
CONF * 001 * 017 * 033 * 049
* 065 * 081 * 097 * 113
MFSD * 000 * 016 * 032 * 048
* 064 * 080 * 096 * 112

DLOP NUM DCH FRM LCMT YALM TRSH
TRK 114 24 ESF B8S FDL 00
115 24 ESF B8S FDL 00
PRI 003 24 ESF B8S FDL 00
018 24 ESF B8S FDL 00
019 24 ESF B8S FDL 00
034 23 ESF B8S FDL 00
035 24 ESF B8S FDL 00
050 24 ESF B8S FDL 00
051 24 ESF B8S FDL 00
EXT0 3PE
CNI 012 000 002
CNI 012 001 003
CNI 013 000 000
CNI 013 001 001
EXT1 3PE
CNI 012 000 002
CNI 012 001 003
CNI 013 000 000
CNI 013 001 001
MCFN S0B0 S0B1 S1B0 S1B1 S2B0 S2B1 S3B0 S3B1 FLSH TOTL
016 000 016 000 016 000 016 016 64 144
OVLY
SID 9254
BKGD 044
PBXH X
TODR 03
DROL 030 034 036 037 039 043 046 060 135 137
MULTI_USER ON
VAS
VSID 07
DLOP
AML 07
SECU NO
INTL 0001
MCNT 9999
CONF DIR
ATRN
CODE 0
SOLR 12
ROLR +45.00
AOLR +45.00
TOLR -45.00
AGCD NO
VOLR NO
HRLR +42.00
HTLR -44.00

Hope this will help you identify ma prob!

Thanks guys.
 
Upvote 0 Downvote
a pri installed corectly will not stay up on a loopback. it will est.. the rel wronge mode. if a pri knocks down your switch check the clocking, even removing the clock should leave your switch in free run. i would relaod the switch, or replace the ssc. and or the pri card.. other then a patch, that's the only way to go.. one rule that i very seldom see broken, if you can't program a switch to restart when the pri goes down, you can't un-program it either.. southern logic

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
Does not look like a PRI but a regular DTI. Change the VOD in the RDB to 3VCE and try that
 
Upvote 0 Downvote
You're right unkalary, it's a plain DTI. I'll try changing VOD for 3VCE and see hoe it goes. But I don't think that would cause the OP11 to OS Restart all the time. I might have a hardware problem either with the SSC or the 1.5Mb DTI/PRI card. And I don't have any spare cards... Hope this is going to do the trick!

Thanks Unkalary.
 
Upvote 0 Downvote
never saw the vsel reply cause a restart, it does cause strange problems, does the t1 card have any daughter boards that it doesn't need? a msdl or dchi or clock (old) daughter board with the switchesw wronge would do a restart in a heartbeat.

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
I have an NTAK20BC Clock Controller D/B and a NTAK93AA DCH D/B. Of course, I don't use the DCH D/B since it's programmed up as a DTI. Do you suggest I remove it?

Thanks johnpoole.
 
Upvote 0 Downvote
if the device number is in conflict, it will cause restart. the device number is an interupt. two links trying to use the same interupt will down a small nation...

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
How do I verify the interrupt of each device? In this case, do you mean the Clock Controller and the DCH ? It's too bad I don't have a spare 1.5Mb DTI/PRI card... Just for your info, I removed the DCH D/B but the switch still OS Restart. I removed the 1.5Mb DTI/PRI card and the switch has been running smooth for a day and a half now. That tells me that's it's either the DTI card itself or the Clock Controler D/B. Your opinion?

Thanks johnpoole.
 
Upvote 0 Downvote
I'm just about to go nutz about all this.... Here's a capture of the messages I get when the OP11C OS Restarts.



*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 1/1/96 11:52:26
Last Restart: 10/8/04 14:20:58
Current Time: 11/8/04 7:49:32

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0
0x20301b78 (tRptD): (11/8/04 7:49:18.346) SRPT780 RST 0: MANUAL INIT IN PROGRES
S
logTask: 65398 log messages lost.

Done executing startup script "c:/p/etc/startupc".
0x20301b78 (tRptD): (11/8/04 7:49:18.357) SRPT782 RST 0: WARM START IN PROGRESS
- Reason 20
0x20301b78 (tRptD): (11/8/04 7:49:18.357) SRPT782 RST 0: WARM START IN PROGRESS
- Reason 20
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg

INI000 00000002 07 50 10 00000000 00000000 00000000 00000000 00000000
Total number of files 0

Warning: No corporate directory files were found!

DSET000 DOWN LOAD 0 0 0 0 0 0 0 297571844

INI002 00000088 00000083

INI003 0000009C 000000A0 000000AF 000000B0 000000B4 000000B8 000000BC 000000CE 0
00000D0


INI003 000000D4 000000D8 000000EE 000000EF
ACDR ACTIVATED


>
IOD365


ESDA002 9 7:50:28 11/08/2004

CSA003 9 7:50:28 11/08/2004

AUD000

SRPT731 OS 0: Warm Start
Release: x112540b
Created: Monday July 29 13:41:20 EDT 2002
Last Cold Start: 1/1/96 11:52:26 (from 'flash ROM')
L

SRPT754 INI due to System Restart
Previous INI: 10/ 8/04 14:21:15
INIs since cold start ( 1/ 1/96 11:52:43): 6

SRPT752 INI 0: INI completed in 9 seconds


.disl 1

OK
.slft 1

DTA003 1

SLFT OK
.slft 1

SLFT OK
.rcnt 1

.lcnt 1

DTI LOOP 1
TRSH CNT:
BPV -000
SLIPD -000
SLIPR -000
CRC -000
LOSFA -000
OS_BPV -000
OS_LOSFA-000
OS_YEL -000


BUG4108
BUG4108 : 0 19
BUG4108 + 1067E808 1046D78A 1046BCFE 10491EAE 10491692
BUG4108 + 10E630C0




.ssck 0
ENBL
CLOCK ACTIVE
CLOCK CONTROLLER - DTI061
PREF - 1
SREF - FREE RUN
AUTO SWREF CLK - ENBL
NO ERROR

IP DB PORT 1 DSBL
IP DB PORT 2 DSBL
IP DB PORT 3 DSBL
IP DB PORT 4 DSBL
CABINET CLK SRC: CC

.ssck 0
ENBL
CLOCK ACTIVE
CLOCK CONTROLLER - DTI061
PREF - 1
SREF - FREE RUN
AUTO SWREF CLK - ENBL
NO ERROR

IP DB PORT 1 DSBL
IP DB PORT 2 DSBL
IP DB PORT 3 DSBL
IP DB PORT 4 DSBL
CABINET CLK SRC: CC


REQ prt
TYPE ddb

CC0 1
PREF CC0 1
SREF CC0 FREE RUN

TRSH 09
RALM 3
BIPC 0
LFAC 0
BIPV 3 2
SRTK 5 30
SRNT 15 3
LFAL 17 511
SRIM 1
SRMM 2
ICS


REQ ****
OVL000
>loio
>

DTA007 1
stat
OVL013
> 1
OVL013
> ld 60
DTI000
.stat 1

DTI TRK LOOP 1 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
TRACKING
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE TIE 3VCE CH 02 - IDLE TIE 3VCE
CH 03 - IDLE TIE 3VCE CH 04 - IDLE TIE 3VCE
CH 05 - IDLE TIE 3VCE CH 06 - IDLE TIE 3VCE
CH 07 - IDLE TIE 3VCE CH 08 - IDLE TIE 3VCE
CH 09 - IDLE TIE 3VCE CH 10 - IDLE TIE 3VCE
CH 11 - IDLE TIE 3VCE CH 12 - IDLE TIE 3VCE
CH 13 - IDLE TIE 3VCE CH 14 - IDLE TIE 3VCE
CH 15 - IDLE TIE 3VCE CH 16 - IDLE TIE 3VCE
CH 17 - IDLE TIE 3VCE CH 18 - IDLE TIE 3VCE
CH 19 - IDLE TIE 3VCE CH 20 - IDLE TIE 3VCE
CH 21 - IDLE TIE 3VCE CH 22 - IDLE TIE 3VCE
CH 23 - IDLE TIE 3VCE CH 24 - IDLE TIE 3VCE
.****
OVL000
>ld 87
ESN000

MEM AVAIL: (U/P): 1263747 USED U P: 66497 29627 TOT: 1359871
DISK RECS AVAIL: 484
REQ prt
CUST 0
FEAT cdp
TYPE dsc
DSC
DSC 6055
FLEN 0
DSP LSC
RLI 1
NPA
NXX


MEM AVAIL: (U/P): 1263747 USED U P: 66497 29627 TOT: 1359871
DISK RECS AVAIL: 484
REQ prt
CUST 0
FEAT cdp
TYPE dsc
DSC
DSC 6055
FLEN 0
DSP LSC
RLI 1
NPA
NXX


MEM AVAIL: (U/P): 1263747 USED U P: 66497 29627 TOT: 1359871
DISK RECS AVAIL: 484
REQ ****
OVL000
>ld 86
ESN000

MEM AVAIL: (U/P): 1263747 USED U P: 66497 29627 TOT: 1359871
DISK RECS AVAIL: 484
REQ prt
CUST 0
FEAT rlb
RLI 1

RLI 1
ENTR 0
LTER NO
ROUT 1
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 0
DMI 1
FCI 0
FSNI 0
SBOC NRR
OHQ NO
CBQ NO

ISET 1
NALT 5
MFRL 0
OVLL 0


MEM AVAIL: (U/P): 1263747 USED U P: 66497 29627 TOT: 1359871
DISK RECS AVAIL: 484
REQ chg
CUST 0
FEAT rlb
RLI 1
ENTR 0
LTER
ROUT
TOD
CNV
EXP
FRL
DMI
FCI
FSNI
SBOC
OHQ
CBQ
ENTR
ISET 0
NALT
MFRL
OVLL

FEAT dgt
DMI 1
DEL 0
INST
CTYP nchg


MEM AVAIL: (U/P): 1263744 USED U P: 66497 29630 TOT: 1359871
DISK RECS AVAIL: 484
REQ prt
CUST 0
FEAT dgt
DMI 1


DMI 1
DEL 0
INST 6055
CTYP NCHG

>
interrupt:
Uninitialized Interrupt!
Vector number 11 (0-255). Unimplemented Opcod
e 1111
Program Counter: 0x1066dccc
Status Register: 0x3004
Warm Start begun - reaso
n 18


System Controller
Pre-Boot: 03 dev2.37
Flash Boot: NTDK34FA_r08 dev2.54
Reset Reason: A0, 2 - Reset due to AP in reset state
SRAM: 128 kBytes
DRAM: 16 MBytes, speed=60 ns
Security ID: 10006092 type: NT_STD
System ID: 10006092
Backup Flash: 1572 kBytes
Program Store: 32 MBytes
Flash Drive: 16 MBytes
Expansion board #1 not installed.
Expansion board #2 not installed.
Ethernet MAC address: 00:00:75:45:10:24
PCMCIA card not installed in drive A.
PCMCIA card not installed in drive B.

*** To invoke install setup program from PCMCIA enter CONTROL-I ***

Executing power up self tests
Power up self test passed
DISKOS to be run.
Verifying Diskos.


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 13:18:22

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0

Done executing startup script "c:/p/etc/startupc".

Loading retained patch from "c:/u/patch/p16094a3.11c"

Loading retained patch from "c:/u/patch/p16094b3.11c"

Loading retained patch from "c:/u/patch/p16094c3.11c"

Loading retained patch from "c:/u/patch/p16094d3.11c"

Loading retained patch from "c:/u/patch/p16094e3.11c"

Loading retained patch from "c:/u/patch/p16095_1.11c"

Loading retained patch from "c:/u/patch/p16603_1.11c"

Loading retained patch from "c:/u/patch/p16669_1.11c"
Activating patch, handle = 0
zdrvGetFileNames at 0x10152286 will be patched to jump to 0x20e35cb8
Patch 0 has been activated successfully.
Activating patch, handle = 1
evtPrefDataDump__FP7__sFILERC14RWSortedVector at 0x10f1c20e will be patched to j
ump to 0x20e362fe
Patch 1 has been activated successfully.
Activating patch, handle = 2
smpEvtCollDump at 0x10eded9a will be patched to jump to 0x20e365c8
Patch 2 has been activated successfully.
Activating patch, handle = 3
temuEndWrite at 0x10e9bb1e will be patched to jump to 0x20e3684a
Patch 3 has been activated successfully.
Activating patch, handle = 4
Modifying a longword at 0x20e36de6 from 0x0 to 0xf05efa5c
Modifying a longword at 0x20e36de2 from 0x0 to 0xf05ef208
DO_WORK at 0x11424344 will be patched to jump to 0x20e36d78
Patch 4 has been activated successfully.
Activating patch, handle = 5
ipMultClkPrint at 0x10ed530e will be patched to jump to 0x20e37186
Patch 5 has been activated successfully.
Activating patch, handle = 6
Modifying a longword at 0x20e37a44 from 0x0 to 0x115767b6
Modifying a longword at 0x20e37a1a from 0x0 to 0x115767b6
Modifying a longword at 0x20e37922 from 0x0 to 0x115767b6
Modifying a longword at 0x20e378f8 from 0x0 to 0x115767b6
Modifying a longword at 0x20e3779c from 0x0 to 0x115767b6
Modifying a longword at 0x20e37732 from 0x0 to 0x115767b6
Modifying a longword at 0x20e37708 from 0x0 to 0x115767b6
Modifying a longword at 0x20e3761e from 0x0 to 0x115767b6
Modifying a longword at 0x20e375f4 from 0x0 to 0x115767b6
Modifying a longword at 0x20e37586 from 0x0 to 0x115767b6
Modifying a longword at 0x20e3752c from 0x0 to 0x1157e9b2
Modifying a longword at 0x20e37444 from 0x0 to 0x115767b6
D_T_SET_RESTRICT at 0x1157684e will be patched to jump to 0x20e373e0
Patch 6 has been activated successfully.
Activating patch, handle = 7
Modifying a longword at 0x20e38436 from 0x0 to 0x10c026dc
Modifying a longword at 0x20e38424 from 0x0 to 0x10c024fc
CHECK_HMDN_FTR at 0x10bf4160 will be patched to jump to 0x20e383b4
Patch 7 has been activated successfully.
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg
Loading MAT script files......

Loading SL1 data

SYS000 002000 000000 000000 000000 CPU 0
SYSDB RLS/ISS: 2540B LOADED FROM C: DATE/TIME: 11/8/2004 12:59:36 RECS: 28 SEQNO
: 54
SYSLOAD ISSUE 25.40B
DONE
INI000 00000000 13 19 06 00000000 00000000 00000000 00000000 00000000
Total number of files 0

Warning: No corporate directory files were found!

DSET000 DOWN LOAD 43 0 5 0 0 0 0 115157

INI002 00000088 00000083

INI003 0000009C 000000A0 000000AF 000000B0 000000B4 000000B8 000000BC 000000CE 0
00000D0


INI003 000000D4 000000D8 000000EE 000000EF


>
INI006 00000081

SRPT750 INI 0: INI on side 0 due to System Cold Start

XMI002 2 XDLC

XMI002 9 CMOD

XMI002 10 MMAIL

XMI002 3 XMLC

XMI002 1 DTI/PRI

ESDA002 9 13:19:22 11/08/2004

CSA003 9 13:19:22 11/08/2004

SRPT752 INI 0: INI completed in 15 seconds


IOD365

interrupt:
Uninitialized Interrupt!
Vector number 11 (0-255). Unimplemented Opcod
e 1111
Program Counter: 0x1066dccc
Status Register: 0x3004
Warm Start begun - reaso
n 36
interrupt: Error changing SL1 priority


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 13:18:43
Last Restart: 11/8/04 13:18:43
Current Time: 11/8/04 14:05:29

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0
0x20301b78 (tRptD): (11/8/04 14:04:56.854) BERR705 EXC 0: Bus Error in Task "tS
L1" (0x203e89f0)
SR=0x1108, PC=0x28251168, Addr=0x28251168, SSW=0x5e2

Done executing startup script "c:/p/etc/startupc".
0x20301b78 (tRptD): (11/8/04 14:05:16.861) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x28251168
0x20301b78 (tRptD): (11/8/04 14:05:16.861) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x28251168
0x20301b78 (tRptD): (11/8/04 14:05:16.861) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x28251168
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg

INI000 00002000 14 06 03 00000000 00000000 00000000 00000000 00000000
Total number of files 0

Warning: No corporate directory files were found!

DSET000 DOWN LOAD 0 0 0 0 0 0 0 5768693

INI002 00000088 00000083

INI003 0000009C 000000A0 000000AF 000000B0 000000B4 000000B8 000000BC 000000CE 0
00000D0


INI003 000000D4 000000D8 000000EE 000000EF
ACDR ACTIVATED


>
IOD365


ESDA002 9 14:06:28 11/08/2004

CSA003 9 14:06:28 11/08/2004

AUD000

SRPT731 OS 0: Warm Start
Release: x112540b
Created: Monday July 29 13:41:20 EDT 2002
Last Cold Start: 11/8/04 13:18:43 (from 'flash ROM')


SRPT754 INI due to System Restart
Previous INI: 11/ 8/04 13:19:00
INIs since cold start (11/ 8/04 13:19:00): 2
Warm Start begun - reason 36
interrupt: Error changing SL1 priority


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 13:18:43
Last Restart: 11/8/04 14:05:49
Current Time: 11/8/04 14:07:30

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0
0x20301b78 (tRptD): (11/8/04 14:07:18.451) BERR705 EXC 0: Bus Error in Task "tS
L1" (0x203e89f0)
SR=0x3000, PC=0x10801a20, Addr=0xa040fd30, SSW=0x105

Done executing startup script "c:/p/etc/startupc".
0x20301b78 (tRptD): (11/8/04 14:07:18.455) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x10801a20
0x20301b78 (tRptD): (11/8/04 14:07:18.455) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x10801a20
0x20301b78 (tRptD): (11/8/04 14:07:18.474) SRPT786 RST 0: Task tSL1 being resta
rted
0x20301b78 (tRptD): (11/8/04 14:07:18.474) SRPT786 RST 0: Task tSL1 being resta
rted
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg

INI000 00002000 14 08 09 00000000 00000000 00000000 00000000 00000000
Total number of files 0

Warning: No corporate directory files were found!

DSET000 DOWN LOAD 0 0 0 0 0 0 0 6018201

INI002 00000088 00000083


>
INI003 0000009C 000000A0 000000AF 000000B0 000000B4 000000B8 000000BC 000000CE 0
00000D0


INI003 000000D4 000000D8 000000EE 000000EF
ACDR ACTIVATED

IOD365


ESDA002 9 14:08:30 11/08/2004

CSA003 9 14:08:30 11/08/2004

AUD000
Warm Start begun - reason 36
interrupt: Error changing SL1 priority


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 13:18:43
Last Restart: 11/8/04 14:07:51
Current Time: 11/8/04 14:09:17

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0

Done executing startup script "c:/p/etc/startupc".
0x20301b78 (tRptD): (11/8/04 14:07:51.081) SRPT731 OS 0: Warm Start
Release: x112540b
Created: Monday July 29 13:41:20 EDT 2002
Last Cold Start: 11/8/04 13:18:43 (from 'flash ROM')
Last Warm Start: 11/8/04 14:05:49 (total: 2)
0x20301b78 (tRptD): (11/8/04 14:08:09.029) SRPT754 INI due to System Restart
Previous INI: 11/ 8/04 14:06:03
INIs since cold start (11/ 8/04 13:19:00): 3
0x20301b78 (tRptD): (11/8/04 14:08:23.466) SRPT752 INI 0: INI completed in 15 s
econds
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg

INI000 00002000 14 09 55 00000000 00000000 00000000 00000000 00000000
Total number of files 0

Warning: No corporate directory files were found!

DSET000 DOWN LOAD 0 0 0 0 0 0 0 6234394

INI002 00000088 00000083

INI003 0000009C 000000A0 000000AF 000000B0 000000B4 000000B8 000000BC 000000CE 0
00000D0



>
SRPT786 RST 0: Task tSL1 being restarted

INI003 000000D4 000000D8 000000EE 000000EF
ACDR ACTIVATED

SRPT786 RST 0: Task tSL1 being restarted

SRPT786 RST 0: Task tSL1 being restarted

IOD365


SRPT786 RST 0: Task tSL1 being restarted

ESDA002 9 14:10:20 11/08/2004

CSA003 9 14:10:20 11/08/2004

SRPT782 RST 0: WARM START IN PROGRESS - Reason 36

SRPT731 OS 0: Warm Start
Release: x112540b
Created: Monday July 29 13:41:20 EDT 2002
Last Cold Start: 11/8/04 13:18:43 (from 'flash ROM')


SRPT754 INI due to System Restart
Previous INI: 11/ 8/04 14:08:09
INIs since cold start (11/ 8/04 13:19:00): 4
20
SRPT752 INI 0: INI completed in 16 seconds


>ld 60
DTI000
.stat 1

DTI TRK LOOP 1 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE TIE 3VCE CH 02 - IDLE TIE 3VCE
CH 03 - IDLE TIE 3VCE CH 04 - IDLE TIE 3VCE
CH 05 - IDLE TIE 3VCE CH 06 - IDLE TIE 3VCE
CH 07 - IDLE TIE 3VCE CH 08 - IDLE TIE 3VCE
CH 09 - IDLE TIE 3VCE CH 10 - IDLE TIE 3VCE
CH 11 - IDLE TIE 3VCE CH 12 - IDLE TIE 3VCE
CH 13 - IDLE TIE 3VCE CH 14 - IDLE TIE 3VCE
CH 15 - IDLE TIE 3VCE CH 16 - IDLE TIE 3VCE
CH 17 - IDLE TIE 3VCE CH 18 - IDLE TIE 3VCE
CH 19 - IDLE TIE 3VCE CH 20 - IDLE TIE 3VCE
CH 21 - IDLE TIE 3VCE CH 22 - IDLE TIE 3VCE
CH 23 - IDLE TIE 3VCE CH 24 - IDLE TIE 3VCE
.

DTI000
.
DTA005 1

DTA007 1

DTA005 1

DTA007 1


DTI000
.****
OVL000
>interrupt:
Uninitialized Interrupt!
Vector number 11 (0-255). Unimplemented Opco
de 1111
Program Counter: 0x1066dccc
Status Register: 0x3004
Warm Start begun - reas
on 18
Warm Start begun - reason 36
interrupt: Error

*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 13:18:43
Last Restart: 11/8/04 14:09:37
Current Time: 11/8/04 14:29:51

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0
0x20301b78 (tRptD): (11/8/04 14:29:39.009) BERR705 EXC 0: Format Error in Task
"tSL1" (0x203e89f0)
SR=0x0017, PC=0x101669ea, Addr=0x200546b4, SSW=0x20082630

Done executing startup script "c:/p/etc/startupc".
0x20301b78 (tRptD): (11/8/04 14:29:39.012) BERR705 EXC 0: Bus Error in Task "tS
L1" (0x203e89f0)
SR=0x2014, PC=0x30001016, Addr=0x30001010, SSW=0x5e6
0x20301b78 (tRptD): (11/8/04 14:29:39.012) BERR705 EXC 0: Bus Error in Task "tS
L1" (0x203e89f0)
SR=0x2014, PC=0x30001016, Addr=0x30001010, SSW=0x5e6
0x20301b78 (tRptD): (11/8/04 14:29:39.012) BERR705 EXC 0: Bus Error in Task "tS
L1" (0x203e89f0)
SR=0x2014, PC=0x30001016, Addr=0x30001010, SSW=0x5e6
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg

INI000 00002000 14 30 29 00000000 00000000 00000000 00000000 00000000
Total number of files 0

Warning: No corporate directory files were found!

DSET000 DOWN LOAD 0 0 0 0 0 0 0 8705453

INI002 00000088 00000083

INI003 0000009C 000000A0 000000AF 000000B0 000000B4 000000B8 000000BC 000000CE 0
00000D0



>
INI003 000000D4 000000D8 000000EE 000000EF
ACDR ACTIVATED

SRPT782 RST 0: WARM START IN PROGRESS - Reason 18

IOD365


Warm Start begun - reason 36
interrupt: Error changing SL1 priority


*** OS RESTART ***


System Controller
Pre-Boot: 03 dev2.37
Flash Boot: NTDK34FA_r08 dev2.54
Reset Reason: 80, 4 - Reset due to CP invoked reset
SRAM: 128 kBytes
DRAM: 16 MBytes, speed=60 ns
Security ID: 10006092 type: NT_STD
System ID: 10006092
Backup Flash: 1572 kBytes
Program Store: 32 MBytes
Flash Drive: 16 MBytes
Expansion board #1 not installed.
Expansion board #2 not installed.
Ethernet MAC address: 00:00:75:45:10:24
PCMCIA card not installed in drive A.
PCMCIA card not installed in drive B.

*** To invoke install setup program from PCMCIA enter CONTROL-I ***

Executing power up self tests
Power up self test passed
DISKOS to be run.
Verifying Diskos.


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 14:31:40

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0

Done executing startup script "c:/p/etc/startupc".

Loading retained patch from "c:/u/patch/p16094a3.11c"

Loading retained patch from "c:/u/patch/p16094b3.11c"

Loading retained patch from "c:/u/patch/p16094c3.11c"

Loading retained patch from "c:/u/patch/p16094d3.11c"

Loading retained patch from "c:/u/patch/p16094e3.11c"

Loading retained patch from "c:/u/patch/p16095_1.11c"

Loading retained patch from "c:/u/patch/p16603_1.11c"

Loading retained patch from "c:/u/patch/p16669_1.11c"
Activating patch, handle = 0
zdrvGetFileNames at 0x10152286 will be patched to jump to 0x20e35cb8
Patch 0 has been activated successfully.
Activating patch, handle = 1
evtPrefDataDump__FP7__sFILERC14RWSortedVector at 0x10f1c20e will be patched to j
ump to 0x20e362fe
Patch 1 has been activated successfully.
Activating patch, handle = 2
smpEvtCollDump at 0x10eded9a will be patched to jump to 0x20e365c8
Patch 2 has been activated successfully.
Activating patch, handle = 3
temuEndWrite at 0x10e9bb1e will be patched to jump to 0x20e3684a
Patch 3 has been activated successfully.
Activating patch, handle = 4
Modifying a longword at 0x20e36de6 from 0x0 to 0xf05efa5c
Modifying a longword at 0x20e36de2 from 0x0 to 0xf05ef208
DO_WORK at 0x11424344 will be patched to jump to 0x20e36d78
Patch 4 has been activated successfully.
Activating patch, handle = 5
ipMultClkPrint at 0x10ed530e will be patched to jump to 0x20e37186
Patch 5 has been activated successfully.
Activating patch, handle = 6
Modifying a longword at 0x20e37a44 from 0x0 to 0x115767b6
Modifying a longword at 0x20e37a1a from 0x0 to 0x115767b6
Modifying a longword at 0x20e37922 from 0x0 to 0x115767b6
Modifying a longword at 0x20e378f8 from 0x0 to 0x115767b6
Modifying a longword at 0x20e3779c from 0x0 to 0x115767b6
Modifying a longword at 0x20e37732 from 0x0 to 0x115767b6
Modifying a longword at 0x20e37708 from 0x0 to 0x115767b6
Modifying a longword at 0x20e3761e from 0x0 to 0x115767b6
Modifying a longword at 0x20e375f4 from 0x0 to 0x115767b6
Modifying a longword at 0x20e37586 from 0x0 to 0x115767b6
Modifying a longword at 0x20e3752c from 0x0 to 0x1157e9b2
Modifying a longword at 0x20e37444 from 0x0 to 0x115767b6
D_T_SET_RESTRICT at 0x1157684e will be patched to jump to 0x20e373e0
Patch 6 has been activated successfully.
Activating patch, handle = 7
Modifying a longword at 0x20e38436 from 0x0 to 0x10c026dc
Modifying a longword at 0x20e38424 from 0x0 to 0x10c024fc
CHECK_HMDN_FTR at 0x10bf4160 will be patched to jump to 0x20e383b4
Patch 7 has been activated successfully.
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg
Loading MAT script files......

Loading SL1 data

SYS000 000808 000000 000000 000000 CPU 0
SYSDB RLS/ISS: 2540B LOADED FROM C: DATE/TIME: 11/8/2004 12:59:36 RECS: 28 SEQNO
: 54
SYSLOAD ISSUE 25.40B
DONE
INI000 00000000 14 32 24 00000000 00000000 00000000 00000000 00000000
Total number of files 0

Warning: No corporate directory files were found!

DSET000 DOWN LOAD 43 0 5 0 0 0 0 116453


>
INI002 00000088 00000083

INI003 0000009C 000000A0 000000AF 000000B0 000000B4 000000B8 000000BC 000000CE 0
00000D0


INI003 000000D4 000000D8 000000EE 000000EF

INI006 00000081

XMI002 2 XDLC

XMI002 9 CMOD

XMI002 10 MMAIL

SRPT750 INI 0: INI on side 0 due to System Cold Start

XMI002 3 XMLC

XMI002 1 DTI/PRI

ESDA002 9 14:32:40 11/08/2004

CSA003 9 14:32:40 11/08/2004

SRPT752 INI 0: INI completed in 15 seconds

DTA003 1

PRI000 1 5

DTA005 1

DTA007 1

REQ: prt
TYPE: tnb
TN 1 1
DATE
PAGE
DES

DES DTI81C
TN 001 01
TYPE TIE
CDEN SD
CUST 0
TRK DTI
PDCA 1
PCML MU
NCOS 0
RTMB 1 1
TGAR 0
SIGL EAM
STRI/STRO WNK WNK
SUPN YES
AST NO
IAPG 0
CLS UNR DTN CND WTA HPR APN THFD HKD
P10 NTC
TKID
DATE 11 AUG 2004

>ld 60
DTI000
.stat 1

DTI TRK LOOP 1 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : NO ALARM
CH 01 - IDLE TIE 3VCE CH 02 - IDLE TIE 3VCE
CH 03 - IDLE TIE 3VCE CH 04 - IDLE TIE 3VCE
CH 05 - IDLE TIE 3VCE CH 06 - IDLE TIE 3VCE
CH 07 - IDLE TIE 3VCE CH 08 - IDLE TIE 3VCE
CH 09 - IDLE TIE 3VCE CH 10 - IDLE TIE 3VCE
CH 11 - IDLE TIE 3VCE CH 12 - IDLE TIE 3VCE
CH 13 - IDLE TIE 3VCE CH 14 - IDLE TIE 3VCE
CH 15 - IDLE TIE 3VCE CH 16 - IDLE TIE 3VCE
CH 17 - IDLE TIE 3VCE CH 18 - IDLE TIE 3VCE
CH 19 - IDLE TIE 3VCE CH 20 - IDLE TIE 3VCE
CH 21 - IDLE TIE 3VCE CH 22 - IDLE TIE 3VCE
CH 23 - IDLE TIE 3VCE CH 24 - IDLE TIE 3VCE
.interrupt:
Uninitialized Interrupt!
Vector number 11 (0-255). Unimplemented Opco
de 1111
Program Counter: 0x1066dccc
Status Register: 0x3004
****Warm Start begun -
reason 36
interrupt: Error changing SL1 priority


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 14:32:01
Last Restart: 11/8/04 14:32:01
Current Time: 11/8/04 14:47:15

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0
0x20301b78 (tRptD): (11/8/04 14:46:43.773) BERR705 EXC 0: Bus Error in Task "tS
L1" (0x203e89f0)
SR=0x1108, PC=0x28251168, Addr=0x28251168, SSW=0x5e2

Done executing startup script "c:/p/etc/startupc".
0x20301b78 (tRptD): (11/8/04 14:47:03.785) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x28251168
0x20301b78 (tRptD): (11/8/04 14:47:03.785) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x28251168
0x20301b78 (tRptD): (11/8/04 14:47:03.807) SRPT786 RST 0: Task tSL1 being resta
rted
0x20301b78 (tRptD): (11/8/04 14:47:03.807) SRPT786 RST 0: Task tSL1 being resta
rted
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg
interrupt: Error changing SL1 priority
Warm Start begun - reason 36


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 14:32:01
Last Restart: 11/8/04 14:47:36
Current Time: 11/8/04 14:48:22

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0

Done executing startup script "c:/p/etc/startupc".
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg
Warm Start begun - reason 36
interrupt: Error changing SL1 priority


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 14:32:01
Last Restart: 11/8/04 14:48:43
Current Time: 11/8/04 14:49:29

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0

Done executing startup script "c:/p/etc/startupc".
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg

INI000 00000008 14 50 06 00000000 00000000 00000000 00000000 00000000
Total number of files 0

Warning: No corporate directory files were found!

SRPT786 RST 0: Task tSL1 being restarted

DSET000 DOWN LOAD 0 0 0 0 0 0 0 2265877


>
INI112

INI002 00000088 00000083

INI003 0000009C 000000A0 000000AF 000000B0 000000B4 000000B8 000000BC 000000CE 0
00000D0


INI003 000000D4 000000D8 000000EE 000000EF
ACDR ACTIVATED

DTA005 1

SRPT786 RST 0: Task tSL1 being restarted

IOD365


ESDA002 9 14:50:34 11/08/2004

CSA003 9 14:50:34 11/08/2004

SRPT782 RST 0: WARM START IN PROGRESS - Reason 36

>ld 60
DTI000
.stat 1

DTI TRK LOOP 1 - ENBL
FFMT/LCMT/YALMT: ESF/B8Z/FDL
SERVICE RESTORE: YES
YEL ALM PROCESS: YES
ALARM STATUS : YELLOW
CH 01 - DSBL TIE 3VCE CH 02 - DSBL TIE 3VCE
CH 03 - DSBL TIE 3VCE CH 04 - DSBL TIE 3VCE
CH 05 - DSBL TIE 3VCE CH 06 - DSBL TIE 3VCE
CH 07 - DSBL TIE 3VCE CH 08 - DSBL TIE 3VCE
CH 09 - DSBL TIE 3VCE CH 10 - DSBL TIE 3VCE
CH 11 - DSBL TIE 3VCE CH 12 - DSBL TIE 3VCE
CH 13 - DSBL TIE 3VCE CH 14 - DSBL TIE 3VCE
CH 15 - DSBL TIE 3VCE CH 16 - DSBL TIE 3VCE
CH 17 - DSBL TIE 3VCE CH 18 - DSBL TIE 3VCE
CH 19 - DSBL TIE 3VCE CH 20 - DSBL TIE 3VCE
CH 21 - DSBL TIE 3VCE CH 22 - DSBL TIE 3VCE
CH 23 - DSBL TIE 3VCE CH 24 - DSBL TIE 3VCE
.
SRPT731 OS 0: Warm Start
Release: x112540b
Created: Monday July 29 13:41:20 EDT 2002
Last Cold Start: 11/8/04 14:32:01 (from 'flash ROM')


SRPT754 INI due to System Restart
Previous INI: 11/ 8/04 14:47:56
INIs since cold start (11/ 8/04 14:32:18): 3

BERR705 EXC 0: Bus Error in Task "tSL1" (0x203e89f0)
SR=0x3000, PC=0x1094f0ac, Addr=0x204f4b02, SSW=0x4c5

SRPT789 RST 0: Exception-caused task restart: TID=0x203e89f0, vec=0x2, pc=0x1094
f0ac

SRPT789 RST 0: Exception-caused task restart: TID=0x203e89f0, vec=0x2, pc=0x1094
f0ac

DTA007 1

SRPT786 RST 0: Task tSL1 being restarted

SRPT786 RST 0: Task tSL1 being restarted

SRPT782 RST 0: WARM START IN PROGRESS - Reason 36
interrupt:
Uninitialized Interrupt!
Vector number 11 (0-255). Unimplemented Opcod
e 1111
Program Counter: 0x1066dccc
Status Register: 0x3004
Warm Start begun - reaso
n 36
interrupt: Error changing SL1 priority


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 14:32:01
Last Restart: 11/8/04 14:49:49
Current Time: 11/8/04 14:52:21

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0

Done executing startup script "c:/p/etc/startupc".

Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg
Loading MAT script files......
Warm Start begun - reason 36
interrupt: Error changing SL1 priority


*** OS RESTART ***


System Controller
Pre-Boot: 03 dev2.37
Flash Boot: NTDK34FA_r08 dev2.54
Reset Reason: 80, 4 - Reset due to CP invoked reset
SRAM: 128 kBytes
DRAM: 16 MBytes, speed=60 ns
Security ID: 10006092 type: NT_STD
System ID: 10006092
Backup Flash: 1572 kBytes
Program Store: 32 MBytes
Flash Drive: 16 MBytes
Expansion board #1 not installed.
Expansion board #2 not installed.
Ethernet MAC address: 00:00:75:45:10:24
PCMCIA card not installed in drive A.
PCMCIA card not installed in drive B.

*** To invoke install setup program from PCMCIA enter CONTROL-I ***

Executing power up self tests
Power up self test passed
DISKOS to be run.
Verifying Diskos.


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 14:54:01

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.
Use of the above software subject to terms of a license agreement.
U.S. Government users subject to "Restricted Rights" under FAR & DFAR.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0

Done executing startup script "c:/p/etc/startupc".

Loading retained patch from "c:/u/patch/p16094a3.11c"

Loading retained patch from "c:/u/patch/p16094b3.11c"

Loading retained patch from "c:/u/patch/p16094c3.11c"

Loading retained patch from "c:/u/patch/p16094d3.11c"

Loading retained patch from "c:/u/patch/p16094e3.11c"

Loading retained patch from "c:/u/patch/p16095_1.11c"

Loading retained patch from "c:/u/patch/p16603_1.11c"

Loading retained patch from "c:/u/patch/p16669_1.11c"
Activating patch, handle = 0
zdrvGetFileNames at 0x10152286 will be patched to jump to 0x20e35cb8
Patch 0 has been activated successfully.
Activating patch, handle = 1
evtPrefDataDump__FP7__sFILERC14RWSortedVector at 0x10f1c20e will be patched to j
ump to 0x20e362fe
Patch 1 has been activated successfully.
Activating patch, handle = 2
smpEvtCollDump at 0x10eded9a will be patched to jump to 0x20e365c8
Patch 2 has been activated successfully.
Activating patch, handle = 3
temuEndWrite at 0x10e9bb1e will be patched to jump to 0x20e3684a
Patch 3 has been activated successfully.
Activating patch, handle = 4
Modifying a longword at 0x20e36de6 from 0x0 to 0xf05efa5c
Modifying a longword at 0x20e36de2 from 0x0 to 0xf05ef208
DO_WORK at 0x11424344 will be patched to jump to 0x20e36d78
Patch 4 has been activated successfully.
Activating patch, handle = 5
ipMultClkPrint at 0x10ed530e will be patched to jump to 0x20e37186
Patch 5 has been activated successfully.
Activating patch, handle = 6
Modifying a longword at 0x20e37a44 from 0x0 to 0x115767b6
Modifying a longword at 0x20e37a1a from 0x0 to 0x115767b6
Modifying a longword at 0x20e37922 from 0x0 to 0x115767b6
Modifying a longword at 0x20e378f8 from 0x0 to 0x115767b6
Modifying a longword at 0x20e3779c from 0x0 to 0x115767b6
Modifying a longword at 0x20e37732 from 0x0 to 0x115767b6
Modifying a longword at 0x20e37708 from 0x0 to 0x115767b6
Modifying a longword at 0x20e3761e from 0x0 to 0x115767b6
Modifying a longword at 0x20e375f4 from 0x0 to 0x115767b6
Modifying a longword at 0x20e37586 from 0x0 to 0x115767b6
Modifying a longword at 0x20e3752c from 0x0 to 0x1157e9b2
Modifying a longword at 0x20e37444 from 0x0 to 0x115767b6
D_T_SET_RESTRICT at 0x1157684e will be patched to jump to 0x20e373e0
Patch 6 has been activated successfully.
Activating patch, handle = 7
Modifying a longword at 0x20e38436 from 0x0 to 0x10c026dc
Modifying a longword at 0x20e38424 from 0x0 to 0x10c024fc
CHECK_HMDN_FTR at 0x10bf4160 will be patched to jump to 0x20e383b4
Patch 7 has been activated successfully.
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg

Loading SL1 data

SYS000 000808 000000 000000 000000 CPU 0
SYSDB RLS/ISS: 2540B LOADED FROM C: DATE/TIME: 11/8/2004 12:59:36 RECS: 28 SEQNO
: 54
SYSLOAD ISSUE 25.40B
DONE
INI000 00000000 14 54 44 00000000 00000000 00000000 00000000 00000000
Total number of files 0

Warning: No corporate directory files were found!

DSET000 DOWN LOAD 43 0 5 0 0 0 0 115015


>
INI002 00000088 00000083

INI003 0000009C 000000A0 000000AF 000000B0 000000B4 000000B8 000000BC 000000CE 0
00000D0


INI003 000000D4 000000D8 000000EE 000000EF

INI006 00000081

XMI002 2 XDLC

XMI002 9 CMOD

XMI002 10 MMAIL

XMI002 3 XMLC

XMI002 1 DTI/PRI

ESDA002 9 14:54:58 11/08/2004

CSA003 9 14:54:58 11/08/2004

SRPT750 INI 0: INI on side 0 due to System Cold Start

SRPT752 INI 0: INI completed in 12 seconds

DTA003 1

PRI000 1 5

DTA005 1

IOD365

0x20349da8 (tExcTask): 1 messages from interrupt level lost.
Warm Start begun - r
eason 36
interrupt: Error changing SL1 priority


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 14:54:21
Last Restart: 11/8/04 14:54:21
Current Time: 11/8/04 15:07:36

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0

Done executing startup script "c:/p/etc/startupc".
0x20301b78 (tRptD): (11/8/04 15:07:24.171) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x10801a20
0x20301b78 (tRptD): (11/8/04 15:07:24.171) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x10801a20
0x20301b78 (tRptD): (11/8/04 15:07:24.188) SRPT786 RST 0: Task tSL1 being resta
rted
0x20301b78 (tRptD): (11/8/04 15:07:24.188) SRPT786 RST 0: Task tSL1 being resta
rted
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg

INI000 00000008 15 08 15 00000000 00000000 00000000 00000000 00000000
Total number of files 0

Warning: No corporate directory files were found!

DSET000 DOWN LOAD 0 0 0 0 0 0 0 1756091


>
INI002 00000088 00000083

INI003 0000009C 000000A0 000000A4 000000AF 000000B0 000000B4 000000B8 000000BC 0
00000CE


INI003 000000D0 000000D4 000000D8 000000EE 000000EF
ACDR ACTIVATED

IOD365


ESDA002 9 15:08:38 11/08/2004

CSA003 9 15:08:38 11/08/2004

AUD000

SRPT731 OS 0: Warm Start
Release: x112540b
Created: Monday July 29 13:41:20 EDT 2002
Last Cold Start: 11/8/04 14:54:21 (from 'flash ROM')


SRPT754 INI due to System Restart
Previous INI: 11/ 8/04 14:54:38
INIs since cold start (11/ 8/04 14:54:38): 2

SRPT752 INI 0: INI completed in 15 seconds

BUG4108
BUG4108 : 0 19
BUG4108 + 1067E808 1046D78A 1046BCFE 10491EAE 10491692
BUG4108 + 10E630C0

TIM000 15:22 11/8/2004 CPU 0

AUD000

TIM000 16:00 11/8/2004 CPU 0

AUD000
Warm Start begun - reason 36
interrupt: Error changing SL1 priority


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 14:54:21
Last Restart: 11/8/04 15:07:56
Current Time: 11/8/04 16:29:30

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0

Done executing startup script "c:/p/etc/startupc".
0x20301b78 (tRptD): (11/8/04 16:29:18.152) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x10801a20
0x20301b78 (tRptD): (11/8/04 16:29:18.152) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x10801a20
0x20301b78 (tRptD): (11/8/04 16:29:18.172) SRPT786 RST 0: Task tSL1 being resta
rted
0x20301b78 (tRptD): (11/8/04 16:29:18.172) SRPT786 RST 0: Task tSL1 being resta
rted
0x20301b78 (tRptD): (11/8/04 16:29:19.121) SRPT782 RST 0: WARM START IN PROGRES
S - Reason 36
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg

INI000 00000008 16 30 10 00000000 00000000 00000000 00000000 00000000
Total number of files 0

Warning: No corporate directory files were found!

DSET000 DOWN LOAD 0 0 0 0 0 0 0 11583171


>
INI002 00000088 00000083

INI003 0000009C 000000A0 000000A4 000000AF 000000B0 000000B4 000000B8 000000BC 0
00000CE


INI003 000000D0 000000D4 000000D8 000000EE 000000EF
ACDR ACTIVATED

IOD365

Warm Start begun - reason 36
interrupt: Error changing SL1 priority


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 14:54:21
Last Restart: 11/8/04 16:29:50
Current Time: 11/8/04 16:30:45

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0

Done executing startup script "c:/p/etc/startupc".
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg
Warm Start begun - reason 36
interrupt: Error changing SL1 priority


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 14:54:21
Last Restart: 11/8/04 16:31:05
Current Time: 11/8/04 16:31:53

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0

Done executing startup script "c:/p/etc/startupc".
0x20301b78 (tRptD): (11/8/04 16:29:50.521) SRPT731 OS 0: Warm Start
Release: x112540b
Created: Monday July 29 13:41:20 EDT 2002
Last Cold Start: 11/8/04 14:54:21 (from 'flash ROM')
Last Warm Start: 11/8/04 15:07:56 (total: 2)
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg

INI000 00000008 16 32 33 00000000 00000000 00000000 00000000 00000000
Total number of files 0

Warning: No corporate directory files were found!

SRPT782 RST 0: WARM START IN PROGRESS - Reason 36


>
DSET000 DOWN LOAD 0 0 0 0 0 0 0 11869623

INI002 00000088 00000083

INI003 0000009C 000000A0 000000A4 000000AF 000000B0 000000B4 000000B8 000000BC 0
00000CE


INI003 000000D0 000000D4 000000D8 000000EE 000000EF
ACDR ACTIVATED

IOD365


ESDA002 9 16:32:56 11/08/2004

CSA003 9 16:32:56 11/08/2004

AUD000

SRPT731 OS 0: Warm Start
Release: x112540b
Created: Monday July 29 13:41:20 EDT 2002
Last Cold Start: 11/8/04 14:54:21 (from 'flash ROM')


SRPT754 INI due to System Restart
Previous INI: 11/ 8/04 16:30:10
INIs since cold start (11/ 8/04 14:54:38): 4

SRPT786 RST 0: Task tSL1 being restarted

SRPT786 RST 0: Task tSL1 being restarted

SRPT786 RST 0: Task tSL1 being restarted

SRPT782 RST 0: WARM START IN PROGRESS - Reason 36

SRPT731 OS 0: Warm Start
Release: x112540b
Created: Monday July 29 13:41:20 EDT 2002
Last Cold Start: 11/8/04 14:54:21 (from 'flash ROM')


SRPT754 INI due to System Restart
Previous INI: 11/ 8/04 16:31:26
INIs since cold start (11/ 8/04 14:54:38): 5

SRPT752 INI 0: INI completed in 15 seconds

TIM000 17:00 11/8/2004 CPU 0

AUD000
0x20349da8 (tExcTask): 1 messages from interrupt level lost.

Warm Start begun - reason 36
interrupt: Error changing SL1 priority


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 14:54:21
Last Restart: 11/8/04 16:32:13
Current Time: 11/8/04 23:06:41

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0

Done executing startup script "c:/p/etc/startupc".
0x20301b78 (tRptD): (11/8/04 23:06:29.461) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x10801a20
0x20301b78 (tRptD): (11/8/04 23:06:29.461) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x10801a20
0x20301b78 (tRptD): (11/8/04 23:06:29.480) SRPT786 RST 0: Task tSL1 being resta
rted
0x20301b78 (tRptD): (11/8/04 23:06:29.480) SRPT786 RST 0: Task tSL1 being resta
rted
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg

INI000 00000008 23 07 15 00000000 00000000 00000000 00000000 00000000
Total number of files 0

Warning: No corporate directory files were found!

DSET000 DOWN LOAD 0 0 0 0 0 0 0 59232325

INI002 00000088 00000083


>
INI003 0000009C 000000A0 000000A4 000000AF 000000B0 000000B4 000000B8 000000BC 0
00000CE


INI003 000000D0 000000D4 000000D8 000000EE 000000EF
ACDR ACTIVATED

IOD365


ESDA002 9 23:07:38 11/08/2004

CSA003 9 23:07:38 11/08/2004

AUD000

SRPT731 OS 0: Warm Start
Release: x112540b
Created: Monday July 29 13:41:20 EDT 2002
Last Cold Start: 11/8/04 14:54:21 (from 'flash ROM')


SRPT754 INI due to System Restart
Previous INI: 11/ 8/04 16:32:33
INIs since cold start (11/ 8/04 14:54:38): 6

SRPT752 INI 0: INI completed in 15 seconds

TIM000 02:00 12/8/2004 CPU 0
interrupt:
Uninitialized Interrupt!
Vector number 11 (0-255). Unimplemented Opcod
e 1111
Program Counter: 0x1066dccc
Status Register: 0x3004
Warm Start begun - reaso
n 36
interrupt: Error changing SL1 priority


*** OS RESTART ***


Meridian 1 X11 System Software
Release : x112540b
Created : Monday July 29 13:41:20 EDT 2002
Loaded : 11/8/04 14:54:21
Last Restart: 11/8/04 23:07:01
Current Time: 12/8/04 2:01:15

Copyright(C) 1972-2001 Nortel Networks. All Rights Reserved.
VxWorks 5.2
Copyright(C) 1984-1995 Wind River Systems, Inc. All Rights Reserved.

Initialize Network Interface.
Network Interface is up.
Host : OP11ELNKPRI
IP Address : 10.88.71.18
Sub-netmask : 255.255.255.248

Executing startup script "c:/p/etc/startupc".
# EDITION AK01, SL1LIB DAM.1439 (99/05/19 18:05:20) -- CLOSED
# Empty startup file for use in the field.
cd "c:/p/etc"
value = 0 = 0x0
0x20301b78 (tRptD): (12/8/04 2:00:42.144) BERR705 EXC 0: Bus Error in Task "tSL
1" (0x203e89f0)
SR=0x1108, PC=0x28251168, Addr=0x28251168, SSW=0x5e2

Done executing startup script "c:/p/etc/startupc".
0x20301b78 (tRptD): (12/8/04 2:01:03.150) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x28251168
0x20301b78 (tRptD): (12/8/04 2:01:03.150) SRPT789 RST 0: Exception-caused task
restart: TID=0x203e89f0, vec=0x2, pc=0x28251168
0x20301b78 (tRptD): (12/8/04 2:01:03.167) SRPT786 RST 0: Task tSL1 being restar
ted
0x20301b78 (tRptD): (12/8/04 2:01:03.167) SRPT786 RST 0: Task tSL1 being restar
ted
Loading MAT script files......
Start SNMP agent
Processed SNMP configuration file c:/p/data/view.cfg

INI000 00000008 02 01 52 00000000 00000000 00000000 00000000 00000000
Total number of files 0

Warning: No corporate directory files were found!

DSET000 DOWN LOAD 0 0 0 0 0 0 0 80192882

INI002 00000088 00000083

INI003 0000009C 000000A0 000000A4 000000AF 000000B0 000000B4 000000B8 000000BC 0
00000CE


INI003 000000D0 000000D4 000000D8 000000EE 000000EF
ACDR ACTIVATED


>
ESDA002 9 2:02:18 12/08/2004

IOD365


CSA003 9 2:02:18 12/08/2004

ERR5234 AML:9 PRIO: 0

AUD000

SRPT731 OS 0: Warm Start
Release: x112540b
Created: Monday July 29 13:41:20 EDT 2002
Last Cold Start: 11/8/04 14:54:21 (from 'flash ROM')


SRPT754 INI due to System Restart
Previous INI: 11/ 8/04 23:07:15
INIs since cold start (11/ 8/04 14:54:38): 7

SRPT752 INI 0: INI completed in 18 seconds

TIM000 02:16 12/8/2004 CPU 0

AUD000

AUD000

TIM000 03:00 12/8/2004 CPU 0

AUD000

AUD000

TIM000 04:00 12/8/2004 CPU 0

AUD000

AUD000

TIM000 05:00 12/8/2004 CPU 0

AUD000

AUD000

TIM000 06:00 12/8/2004 CPU 0

AUD000

AUD000

TIM000 06:45 12/8/2004 CPU 0

ERR4019 2060

TIM000 07:00 12/8/2004 CPU 0


Thanks in advance to whoever can help me on this [morning]
 
Upvote 0 Downvote
SRPT782 RST 0: WARM START IN PROGRESS - Reason 36
interrupt:
Uninitialized Interrupt!
those are the lines that tell the story.. that tells me that you have either a switch setting wronge. my last post warned of a interrupt (device number) conflict.. or a bad card.. more then likely it's a switch setting..check them again

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
Thanks johnpoole. Excuse my ignorance but witch switch setting are you referring to? On which card?
 
Upvote 0 Downvote
Here'es more info. On bootup, I get the following error messages;

SYS0641 SYSL003120 003A35 000 CE0 00
SYS0071 0CE1 FATAL

I tried to reinstall the software but I get an error when the installation gets to backing up files.

Flash memory problem on daughter board? NTTK25BA?

Any advice is welcome...

Maripaq
 
Upvote 0 Downvote
switch setting's on d channel daughter board that set the device number... just a guess... system will not boot if you are using the same interupt for 2 devices

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
Maripaq
First: I suggest you that remove the NTAK93 DCHI card, because you want to use DTI and not PRI.
Second: You need to reprogramed the option 81C also. I see that you have the loop 19 programmed in PRI mode. In the option 81C you don´t need MSDL card for DCH funcionality.
Remove all programming relationated with this loop and programming again in LD 17 in DTI mode.
Third: The VCE prompt must equal in both systems.
Fourth: Programming the clock into the option 11C tracking the loop 1.

Good luck and any additional questions that you have I help you immediately.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

werman
  • Locked
  • Question
Issues Installing Fresh OS opt11
Replies
7
Views
512
Firebird Scrambler
Firebird Scrambler
hamiltonfax
  • Locked
  • Question
Option 11C - OS re-installation
Replies
7
Views
334
Firebird Scrambler
Firebird Scrambler
Shivrohi
  • Locked
  • Question
Avaya 2050pc softphone keeps on restarting 1
Replies
8
Views
362
Shivrohi
Shivrohi
SIO3
  • Locked
  • Question
Option 11C - OS re-installation 2
Replies
13
Views
279
SIO3
SIO3
bazzieb
  • Locked
  • Question
Linux OS and CS1000
Replies
5
Views
165
Wanebo
Wanebo

Part and Inventory Search

Sponsor

Back
Top