Calls to numbers that start with 6 get a reorder tone immediately after the 8th digit is dialed, from the same phone all other calls go through ok, I took a sample of a good call vs a bad call,
on the bad call the call fails with denial event 1166: Unassigned number D1=0x9b88 D2=0x201
on the calls that fail I see that CM doesn't process all the digits as they were dialed, it blocks the call at the 8th digit and tears down the call with denial event 1166: Unassigned number D1=0x9b88 D2=0x201, CM won't let calls that start with 6 dial more than 8 digits, very strange. I ran a list ars route-chosen 16099545502 location 169 and I see that there is a matching route through pattern 2 on the ars table but it goes through route pattern 998 which belongs to the aar table
On the good call I dialed 8668475500 from 2154462017
On the bad call I dialed 6099545502 from 2154462017
any suggestions will be highly appreciated!
thanks!