Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
onebox voicemail configuration
- Thread starter 24062003
- Start date
For a generic extension you will need to use a personal profile "PELPI".
So for extension 1234 for example you will use:
PELPI
IR=1234,LIST=1,CHO=1,ANSPOS=1234,TIME=15,BSYCHO=2; this will set the first choice in the profile so that it will ring on the handset for 15 seconds and if busy or unanswered goes to choice 2 in the list.
PELPIIR=1234,LIST=1,CHO=2,ANSPOS=xxxx,TIME=15,BSYCHO=0; this will send any calls that rolled over from choice 1 to the voicemail (substitue xxxx for your VM pilot number)
If you want it to go straight to voicemail then substitute the ANSPOS in the first choice for the VM pilot number.
So for extension 1234 for example you will use:
PELPI
IR=1234,LIST=1,CHO=1,ANSPOS=1234,TIME=15,BSYCHO=2; this will set the first choice in the profile so that it will ring on the handset for 15 seconds and if busy or unanswered goes to choice 2 in the list.PELPI
IR=1234,LIST=1,CHO=2,ANSPOS=xxxx,TIME=15,BSYCHO=0; this will send any calls that rolled over from choice 1 to the voicemail (substitue xxxx for your VM pilot number)If you want it to go straight to voicemail then substitute the ANSPOS in the first choice for the VM pilot number.
- Status
