one X mobile lite

[commcon1]

Gents,

trying to set up one x mobile lite on an Iphone,I have set up DDI numbers in IP office FNE 00 and can get dial tone back and onward dial ok. When I am setting the settings within the iphone app it asks for International code(00)long distance code (0)and international code(+44).The problem is that when I use the app it is sending out +44(0)120459xxxx and this gets rejected, if I attempt to remove the zero the app wont allow it.Anyone got any ideas??

 

[eddiebullman]

Hi
I had this problem with on my setup what I had to do is program all the dial parameters
Outside Line (ARS Code) 9 (neet set short code on IPO for this)
Local Numbers - # of digits 6
Local Country Code 44
Long distance code 0
International 00
EC500 Specific Settings
(with the 6 DDi numbers on the system)
Use country code
(Set to OFF)
Direct Dial
(Set to ON)
Min # Digits Extensions (set to what you use on your system mine is 4)

These setting work on my iPhone

 

[commcon1]

Thanks I found this as well and it now works ok