Having an issue with One-X Mobile. All calls work fine from the mobile client internally when connected to WiFi. Externally (3G/4G) inbound/outbound calls across the PRI work fine from the mobile client, but get no audio on station to station calls. This includes Mobile client to mobile client, and mobile client to IP deskphone. Exhibiting behavior much like a direct media path issue, but can't put my finger on it for sure. Running IPO 500V2 R9.0.2. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
One-X Mobile Issue
- Thread starter jfilary
- Start date
smokinjoe2938
Programmer
Most post from these seem to always point to the network set up
acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
- Thread starter
- #3
I hear you on that smokinjoe, and you are probably right. Only posted because we have looked at the network config over and over again, and everything seems fine. The problem appears to be that the Mobile client is routing RTP traffic back to an IP address (external static) that we don't have specified anywhere in our Avaya equipment (500V2 or One-X Server). I'm sure I'm missing some little detail somewhere. Just can't put my finger on why it works for anything except Mobile client to mobile client or mobile client to IP phone. Thanks for the reply. We'll dig in on the network side some more.
- Status
Similar threads
- Locked
- Question