Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

One-x Communicator to One-x communicator no audio

Status
Not open for further replies.

TykeUK

Technical User
Jul 27, 2004
525
0
0
GB
Can anyone please advise me on the best settings for an ip-network region for homeworkers (CM5.2). We use one-x communicator and calls from people at home to the users in the office are fine but to other homeworkers the quality isn't the best. I've always put this down to users broadband and vpn etc but just wanted to check... We have the below setup currently...

Name: Softphones
MEDIA PARAMETERS Intra-region IP-IP Direct Audio: no
Codec Set: 2 Inter-region IP-IP Direct Audio: yes
UDP Port Min: 16384 IP Audio Hairpinning? y
UDP Port Max: 32767
DIFFSERV/TOS PARAMETERS RTCP Reporting Enabled? y
Call Control PHB Value: 26 RTCP MONITOR SERVER PARAMETERS
Audio PHB Value: 46 Use Default Server Parameters? y
Video PHB Value: 26
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 3
Audio 802.1p Priority: 5
Video 802.1p Priority: 5 AUDIO RESOURCE RESERVATION PARAMETERS
H.323 IP ENDPOINTS RSVP Enabled? n
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
Keep-Alive Count: 5


Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top