BiscuitJack
Programmer
thread798-1592756
I have the exact same problem with the previous thread listed above. I didn't see a resolution to the previous thread so I'm starting a new thread to rehash. The scenario is a CS1000E 5.5 and POE IP2033's installed. The IP2033's after about 50 or so calls exibit one way speech path behavior but only outbound on PSTN calls. The caller sitting at the IP2033 can hear the external party during the call but the external person cannot hear the outbound speech path. We are using the latest firmware on the IP2033's and the temporary work around is to power cycle the IP2033's. Again, 50 or so calls later something in the phone glitches and the phone requires another power cycle to get back on track.
I have the exact same problem with the previous thread listed above. I didn't see a resolution to the previous thread so I'm starting a new thread to rehash. The scenario is a CS1000E 5.5 and POE IP2033's installed. The IP2033's after about 50 or so calls exibit one way speech path behavior but only outbound on PSTN calls. The caller sitting at the IP2033 can hear the external party during the call but the external person cannot hear the outbound speech path. We are using the latest firmware on the IP2033's and the temporary work around is to power cycle the IP2033's. Again, 50 or so calls later something in the phone glitches and the phone requires another power cycle to get back on track.
