One voicemail for two pbx

[iso28]

Hi



I have 1opt11c and one opt61c pbxs connected via PRI link;

i have call pilot 201i installed in opt11c, on the opt11c everything works fine(mailboxes+MWI)

i am able to configure mailboxes for an extension on opt61c pbx by "fdn" forward no answer this extension to the cpilot dn, and

by adding it as a mailbox on callpilot;

however i am not receiving MWI on the phone sets on the opt61c pbx,whenever they get a message.

I don't want to use NMS pkgs any workaround idea how to do it?



Regards

 

[PERRYPJ]

THATS HOW THE LAMP IS SET

OLD ROLMEN WORKING ON NORTELS

 

[phonz1]

make sure that your PNI's match in the RDB

 

[johnpoole]

hows your networking.. a pri is plenty,, look at the rcap.. if i dial 1000 from the 61 to call ext 1000 and 2000 from the 11 to hit the 61 your callpilot will see it as one switch... if your dialing a code plus the dn between swtiches they are not networked so cp will have bugs

john poole
bellsouth business
columbia,sc

 

[Johnthephoneguy]

We use the same setup but the mailboxes for the offsite PBX have to be built differently.

Office with voicemail they are built as regular 4 digit boxes

Other office is built as 2953xxxx mailboxes

2 is our tie line code
953 is the prefix for other pbx(we also have 206 so that is why not 2xxxx
xxxx is the 4 digit extension of other site

MW lamps work fine for us, no issues.

JohnThePhoneGuy

"If I can't fix it, it's not broke!