I have an Alti-IP 600 connected to a TZ 150 the time warner cable to the net and back into an alti server on the east coast. I believe I opened all the necessary ports and then some on the 150 such as:
H.225 port 1720 TCP
Altigen Phone Service 10032 TCP
Altigen Ports TCP 49140-49160 TCP and
Altigen Ports TCP 49140-49160 UDP
The enable consistent NAT is on under firewall > VoIP
Are there any other settings or what should I focus on for the way communication.. server end can hear me and my phone can register on the network.
H.225 port 1720 TCP
Altigen Phone Service 10032 TCP
Altigen Ports TCP 49140-49160 TCP and
Altigen Ports TCP 49140-49160 UDP
The enable consistent NAT is on under firewall > VoIP
Are there any other settings or what should I focus on for the way communication.. server end can hear me and my phone can register on the network.
