Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

One more IPX accelar routing question..

Status
Not open for further replies.
dcherde

dcherde

Technical User
Joined
May 25, 2004
Messages
7
Location
JP
I have another question if I may..

It appears that the blades are ARU1 (initial versions) and the ASIC in them is not right for routing the IPX that I so dearly crave and have been working to get. Do I need to set up a vlan by protocol and somehow add this to the other vlans? It is amazing how a solution breeds questions.

Thanks...
David
 
Status
Not open for further replies.

Similar threads

lneto
  • Locked
  • Question Question
inter vlan routing
Replies
0
Views
667
lneto
lneto
AlfonsoSF
  • Locked
  • Question Question
how to configure a port with two or more vlans
Replies
0
Views
492
AlfonsoSF
AlfonsoSF
UnderTheBusAsUsual
  • Locked
  • Question Question
Avaya IPO with OneCom and Gamma SIP trunks
Replies
1
Views
891
Firebird Scrambler
Firebird Scrambler
sidisofi
  • Locked
  • Question Question
2 Avaya CS1000 failed to register one another across Cisco IP network running OSPF
Replies
0
Views
290
sidisofi
sidisofi
kramer22
  • Locked
  • Question Question
Have a inbound call question.
Replies
2
Views
389
kramer22
kramer22

Part and Inventory Search

Sponsor

Back
Top