One more Caller ID question BCM200

[atascoman]

OK. I have a BCM200 rls 3.7 connected to a CS1000S 4.5 via H323 trunks and NRS. The BCM users have all of there local and LD calls going out the trunks of the CS1000S. They are complaining about the caller ID of the CS1000S being transmitted instead of the BCMs caller ID info.

I have the public OLI info setup and caller ID works site to site. I am not sure how to tell the CS1000S to transmit/forward the callerID info from the BCM to the PSTN.

 

[SupportDude]

I would suggest posting the question in the Meridian forum.
I'm not sure that you can change it.

-SD-

http://www.mysupportguy.net