Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

On a CS1000e, how do you set a ncos

Status
Not open for further replies.

moonmullins50

Technical User
Oct 19, 2003
5
US
On a CS1000e, how do you set a ncos to local calls only?
 
You will need to check out your current FCR tables in LD 49 and your extension needs to have CLS = TLD and the NCOS / FCR table that is assigned for local calls.

I've added a guide that might help you?.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support


 
I have very rarely seen FCR tables used. Actually once since 1991. Typically it's just the FRL Level in the RLI for local NXX's and also the ESN Data Block which matches FRL to NCOS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top