OLI problem with the NPA? 1

[Deweyhumbolt]

I just installed a BCM450 at 6.0. On the OLI I've used in the past it forced you to enter all 10 digits under the telephone. In 6.0 it only allows you to enter 7 digits. The BCM is sending the NPA of somewhere in Washington, instead of the (949) of Irvine. Where can I change this? Thanks!

"Adversity is Opportunity

 

[ECartman]

The amount of allowed OLI digits is based upon the public reeived digit in the dial plan

 

[Deweyhumbolt]

Why? I believe you because we are receiving 7 digits. I guess the question is how do I get my NPA 949 on the OLI instead of the default?

"Adversity is Opportunity

 

[ECartman]

Increase your public received to 10 digits. If your carrier is only sending 7, it wont matter as the BCM will read the digits from right to left and make the closest match.

 

[Deweyhumbolt]

So all BCMs at 6.0 have their Public Received set at 10 in order to send 10 digits out in OLI? That means I have to change every every Target Line entry and add what?

"Adversity is Opportunity

 

[curlycord]

Try going to:
Dialing Plan\Prefix Default and change to 10


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[ECartman]

Don't think it is just 6.0, I setup like this pre 6.0

 

[Deweyhumbolt]

Bingo! Thanks curlycord.

"Adversity is Opportunity